mplab and eeprom data area

Started by el_gringo69uk March 5, 2003
I,m having a lot of fun on a 16F84 project of mine which relies on
data stored in the eeprom memory.
Question : how do I predefine whats stored in the eeprom area?
That is, as part of the .asm file. Or does it need to be saved in a
seperate file. I am using ICPROG to program my PIC, hopefully it will
recognise the extra data.
Someone else told me to use the org command at the eeprom address, but
I can't find the address in the 16F84 datasheet.
Thanks in advance,
Texy



Hi!

ORG 2100H

DATA 0x06 ; Address 0
DATA 0x02
DATA 0x02
DATA 0x04
DATA 0x03

Hope it will be helpfull
--
Best Regards
Ghan CAN -----Original Message-----
From: "el_gringo69uk" <>
To:
Date: Wed, 05 Mar 2003 21:49:34 -0000
Subject: [piclist] mplab and eeprom data area

> I,m having a lot of fun on a 16F84 project of mine which relies on
> data stored in the eeprom memory.
> Question : how do I predefine whats stored in the eeprom area?
> That is, as part of the .asm file. Or does it need to be saved in a
> seperate file. I am using ICPROG to program my PIC, hopefully it will
> recognise the extra data.
> Someone else told me to use the org command at the eeprom address, but
> I can't find the address in the 16F84 datasheet.
> Thanks in advance,
> Texy > ------------------------ Yahoo! Groups Sponsor
> ---------------------~-->
> Get 128 Bit SSL Encryption!
> http://us.click.yahoo.com/LIgTpC/vN2EAA/xGHJAA/dN_tlB/TM
> ---------------------------------~-
> >
>
> to unsubscribe, go to http://www.yahoogroups.com and follow the
> instructions
>
> ">http://docs.yahoo.com/info/terms/





--- In , "GOKHAN OZCAN" <988936@s...> wrote:
> Hi!
>
> ORG 2100H
>
> DATA 0x06 ; Address 0
> DATA 0x02
> DATA 0x02
> DATA 0x04
> DATA 0x03
>
> Hope it will be helpfull
> --
> Best Regards
> Ghan CAN
>

Yes - thankyou - that worked a treat!
Texy