Does anyone have or know of a source for good PID control code (written in C) for the PIC. I intend to do drive motor speed control with a 16F876A using the built-in PWM hardware. Thanks, BRW |
|
PID Control With the PIC
Started by ●September 23, 2004
Reply by ●September 23, 20042004-09-23
Hi fellow. This is not exactly what you are looking for but will give you a good starting point. http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId2 4&appnote=en011782 Regards, *Carlos Marcano* -Guri, Venezuela- |
Reply by ●September 23, 20042004-09-23
application note AN718 might be useful. I did it, and worked well. rashid --- Bennet Williams <> wrote: > Does anyone have or know of a source for good PID > control code > (written in C) for the PIC. I intend to do drive > motor speed control > with a 16F876A using the built-in PWM hardware. > > Thanks, > > BRW _______________________________ |