USB converter

Started by affa_3 August 14, 2007
hi..
why does my DC 9.21 cannot open serial port using the rs232 to usb
converter but i use direct pc com port to rs232 the DC 9.21 run
smoothly.
what is the correct adjustment to connect RCM 3100 Prototyping board
and DC 9.21 using USB converter
affa_3 wrote:
> hi..
> why does my DC 9.21 cannot open serial port using the rs232 to usb
> converter but i use direct pc com port to rs232 the DC 9.21 run
> smoothly.
> what is the correct adjustment to connect RCM 3100 Prototyping board
> and DC 9.21 using USB converter
>
What converter are you using? Some work better than others.

There is a setting in the communications options for USB, mine work fine
regardless of the settings.

--
------
| Scott G. Henion| s...@shdesigns.org |
| Consultant | Stone Mountain, GA |
| SHDesigns http://www.shdesigns.org |
------
Rabbit libs: http://www.shdesigns.org/rabbit/
today's fortune
"`That young girl is one of the least benightedly
unintelligent organic life forms it has been my profound
lack of pleasure not to be able to avoid meeting.'"

- Marvin's first ever compliment about anybody.
--- In r..., Scott Henion wrote:
>
> affa_3 wrote:
> > hi..
> > why does my DC 9.21 cannot open serial port using the rs232 to
usb
> > converter but i use direct pc com port to rs232 the DC 9.21 run
> > smoothly.
> > what is the correct adjustment to connect RCM 3100 Prototyping
board
> > and DC 9.21 using USB converter
> >
> What converter are you using? Some work better than others.
>
> There is a setting in the communications options for USB, mine
work fine
> regardless of the settings.
>
> --
> ------
> | Scott G. Henion| shenion@... |
> | Consultant | Stone Mountain, GA |
> | SHDesigns http://www.shdesigns.org |
> ------
> Rabbit libs: http://www.shdesigns.org/rabbit/
> today's fortune
> "`That young girl is one of the least benightedly
> unintelligent organic life forms it has been my profound
> lack of pleasure not to be able to avoid meeting.'"
>
> - Marvin's first ever compliment about anybody.
>
im using a profilic driver for the converter...
it work when i test it with a mouse..
Please use the one which is available from rabbit,
works good without any issue.

Fakhre Alam

--- affa_3 wrote:

> --- In r..., Scott Henion
> wrote:
> >
> > affa_3 wrote:
> > > hi..
> > > why does my DC 9.21 cannot open serial port
> using the rs232 to
> usb
> > > converter but i use direct pc com port to rs232
> the DC 9.21 run
> > > smoothly.
> > > what is the correct adjustment to connect RCM
> 3100 Prototyping
> board
> > > and DC 9.21 using USB converter
> > >
> > What converter are you using? Some work better
> than others.
> >
> > There is a setting in the communications options
> for USB, mine
> work fine
> > regardless of the settings.
> >
> >
> >
> > --
> > ------
> > | Scott G. Henion| shenion@... |
> > | Consultant | Stone Mountain, GA |
> > | SHDesigns http://www.shdesigns.org |
> > ------
> > Rabbit libs: http://www.shdesigns.org/rabbit/
> > today's fortune
> > "`That young girl is one of the least benightedly
> > unintelligent organic life forms it has been my
> profound
> > lack of pleasure not to be able to avoid
> meeting.'"
> >
> > - Marvin's first ever compliment about anybody.
> >
> im using a profilic driver for the converter...
> it work when i test it with a mouse..
>
>
> Yahoo! Groups Links
>

____________________________________________________________________________________
Fussy? Opinionated? Impossible to please? Perfect. Join Yahoo!'s user panel and lay it on us. http://surveylink.yahoo.com/gmrs/yahoo_panel_invite.asp?a=7