Saeed Hassan (@saeedhassan)
Actually the same code works for Eval-Kit of this decoder IC that is why I am confident at the software side like at eval kit both even and odd addresses are read/write...
Dear Sir,I have done this test, and it still works the same way. Any bit combination on even addresses work. And on odd it doesn't work in any case. Secondly the...
Sure thanks sir,What i will try is to first try to write all the possible combinations(00-FF) on a register which are working already, will see if it stuck somewhere otherwise ...
The connections are perfectly fine and OK and i have re re verified them. Half of the registers of ADV7403 I2C are working accordingly. If the connection would had...
I am using a FPGA and have written my own driver for it. The same is working on the EVAL-kit of ADV7403 but not on my design. I dont think it even as a hardware...
I think it is referring to repeated start that is the part of the I2C standard. Yes, I have also applied the repeated start condition. I am unable to write/read...
Use this form to contact saeedhassan
Before you can contact a member of the *Related Sites:
- You must be logged in (register here)
- You must confirm you email address
