Op Amps for Everyone, Fourth Edition

Op Amps for Everyone is an indispensable guide and reference for designing circuits that are reliable, have low power consumption, and are as small and low-cost as possible. Operational amplifiers are essential in modern electronics design, and are used in medical devices, communications technology, optical networks, and sensor interfacing.

This book is informed by the authors' years of experience, wisdom and expertise, giving engineers all the methods, techniques and tricks that they need...

USB: The Universal Serial Bus (FYSOS: Operating System Design Book 8)

Learn to program the four major USB controllers, UHCI, OHCI, EHCI, and the new xHCI, and communicate with devices attached to their root hubs, without operating system intervention. This book teachs you how to communicate with the bare hardware to request the device descriptors and then send and received data from various USB devices including USB external Hubs.

SuperSpeed Device Design By Example

This is a "How-To" book which explains, with hands-on examples, how to design and implement a SuperSpeed USB peripheral that can interface to your hardware using a 32-bit 100MHz bus with standard or custom protocols. The book is based on the Cypress FX3 SuperSpeed Device and the firmware examples are written around a low-cost SuperSpeed Explorer board and a companion CPLD board which are available from www.cypress.com/fx3book. The software examples are written for the Windows operating...

Principles of Cyber-Physical Systems (The MIT Press)

A foundational text that offers a rigorous introduction to the principles of design, specification, modeling, and analysis of cyber-physical systems.A cyber-physical system consists of a collection of computing devices communicating with one another and interacting with the physical world via sensors and actuators in a feedback loop. Increasingly, such systems are everywhere, from smart buildings to medical devices to automobiles. This textbook offers a rigorous and comprehensive...

Real-Time Concepts for Embedded Systems

'... a very good balance between the theory and practice of real-time embedded system designs.' —Jun-ichiro itojun Hagino, Ph.D., Research Laboratory, Internet Initiative Japan Inc., IETF IPv6 Operations Working Group (v6ops) co-chair 'A cl

Embedded Systems with ARM Cortex-M3 Microcontrollers in Assembly Language and C

This book introduces basic programming of ARM Cortex chips in assembly language and the fundamentals of embedded system design. It presents data representations, assembly instruction syntax, implementing basic controls of C language at the assembly level, and instruction encoding and decoding. The book also covers many advanced components of embedded systems, such as software and hardware interrupts, general purpose I/O, LCD driver, keypad interaction, real-time clock, stepper motor control,...

Embedded Software Development for the Internet Of Things: The Basics, the Technologies and Best Practices

Details can be found on the web - when you know what to look for The aim of this book is to help you understand the technologies behind the devices used in the Internet Of Things. This is done with a mixture of theory, examples and 'war-stories'. This book may be read by senior students, but it is more likely to be read by programmers and developers, who have done some programming of PC's in Windows or Linux, and are now faced with developing devices for the Internet Of Things. Basic...

Designing Embedded Hardware

Embedded computer systems literally surround us: they're in our cell phones, PDAs, cars, TVs, refrigerators, heating systems, and more. In fact, embedded systems are one of the most rapidly growing segments of the computer industry today.Along with the growing list of devices for which embedded computer systems are appropriate, interest is growing among programmers, hobbyists, and engineers of all types in how to design and build devices of their own. Furthermore, the knowledge offered by...

Design Recipes for FPGAs, Second Edition: Using Verilog and VHDL

This book provides a rich toolbox of design techniques and templates to solve practical, every-day problems using FPGAs. Using a modular structure, it provides design techniques and templates at all levels, together with functional code, which you can easily match and apply to your application. Written in an informal and easy to grasp style, this invaluable resource goes beyond the principles of FPGAs and hardware description languages to demonstrate how specific designs can be synthesized,...

Data Conversion Handbook (Analog Devices)

This comprehensive handbook is a one-stop engineering reference. Covering data converter fundamentals, techniques, applications, and beginning with the basic theoretical elements necessary for a complete understanding of data converters, this reference covers all the latest advances in the field. This text describes in depth the theory behind and the practical design of data conversion circuits as well as describing the different architectures used in A/D and D/A converters. Details are...

The Zynq Book Tutorials for Zybo and ZedBoard

This book comprises a set of five tutorials, and provides a practical introduction to working with Zynq-7000 All Programmable System on Chip, the family of devices from Xilinx that combines an application-grade ARM Cortex-A9 processor with traditional FPGA logic fabric. It is a companion text for 'The Zynq Book' (ISBN-13: 978-0992978709). The tutorials target two popular Zynq development boards: the ZedBoard, and the lower cost Zybo. Working through, the reader will take first steps with the...

Embedded Linux Projects Using Yocto Project Cookbook

Over 70 hands-on recipes for professional embedded Linux developers to optimize and boost their Yocto know-how

• Explore best practices for all embedded product development stages
• Use what is quickly becoming the standard embedded Linux product builder framework, the Yocto Project
• Easy to follow guide to solve all your project woes

If you are an embedded developer learning about embedded Linux with some experience with the Yocto project, this book is the ideal...

The Engineering of Reliable Embedded Systems (LPC1769)

The "Engineering of Reliable Embedded Systems" (ERES) book series documents an industry-proven approach to the development of software for reliable, real-time embedded systems, based on the use of time-triggered (TT) architectures. "ERES (LPC1769)" describes techniques that may be applied to systems in a wide range of sectors, ranging from household goods to satellite and marine systems. The main case study (presented in an initial version in Chapter 3 and in a final version in Chapter 15)...

The Definitive Guide to ARM® Cortex®-M0 and Cortex-M0+ Processors, Second Edition

The Definitive Guide to the ARM® Cortex®-M0 and Cortex-M0+ Processors, Second Edition explains the architectures underneath ARM’s Cortex-M0 and Cortex-M0+ processors and their programming techniques.

Written by ARM’s Senior Embedded Technology Manager, Joseph Yiu, the book is packed with examples on how to use the features in the Cortex-M0 and Cortex-M0+ processors. It provides detailed information on the instruction set architecture, how to use a number of popular...

The Hobbyist' Guide to Programming the MSP430: Issue 1: Getting Oriented

In this first issue, the author explains everything you need to know before you purchase any MSP430 microcontroller kit, and all written in simple English. You'll learn the common terminology that surrounds microcontrollers, what you need to program an MSP430, what the marketplace offers to the hobbyist, and six different hardware options are presented that will help you decide which development kit is best for you. Every part of the development kit is explained. Such as host licenses,...

Embedded Systems: Introduction to the MSP432 Microcontroller (Volume 1)

This book is the first in a series of two books that teach the fundamentals of embedded systems as applied to the MSP432 of microcontroller. This first book is an introduction to computers and interfacing focusing on assembly language and C programming. The second book Embedded Systems: Real-Time Interfacing to the MSP432 Microcontroller focuses on hardware/software interfacing and the design of embedded systems. This first book is an introductory book that could be used at the college...

Programming and Interfacing ATMEL's AVRs

Atmel's AVR microcontrollers are the go-to chip for many hobbyists and hardware hacking projects. In this book, PROGRAMMING AND INTERFACING ATMEL'S AVRS, you will learn how to program and interface using three of Atmel's microcontrollers--the ATtiny13, the ATmega328, and the ATmega32. The book begins with the binary number system and move into programming in assembly, then C and C++. Very little prior engineering knowledge is assumed. You'll work step-by-step through sections on connecting...

Cracking the Coding Interview

I am not a recruiter. I am a software engineer. And as such, I know what it's like to be asked to whip up brilliant algorithms on the spot and then write flawless code on a whiteboard. I've been through this as a candidate and as an interviewer. Cracking the Coding Interview, 6th Edition is here to help you through this process, teaching you what you need to know and enabling you to perform at your very best. I've coached and interviewed hundreds of software engineers. The result is this...

Automate the Boring Stuff with Python: Practical Programming for Total Beginners

If you've ever spent hours renaming files or updating hundreds of spreadsheet cells, you know how tedious tasks like these can be. But what if you could have your computer do them for you?

In Automate the Boring Stuff with Python, you'll learn how to use Python to write programs that do in minutes what would take you hours to do by hand—no prior programming experience required. Once you've mastered the basics of programming, you'll create Python programs that effortlessly perform...

Learn Python in One Day and Learn It Well: Python for Beginners with Hands-on Project. The only book you need to start c

Master Python Programming with a unique Hands-On Project

Have you always wanted to learn computer programming but are afraid it'll be too difficult for you? Or perhaps you know other programming languages but are interested in learning the Python language fast?

This book is for you. You no longer have to waste your time and money learning Python from lengthy books, expensive online courses or complicated Python tutorials.

Complex concepts...