Hello All, using a timer output compare interrupt, I tried to reset the corresponding bit in TFLG1 by writing a '1' to it. This didn't seem to work - only the "fast clear" mechanism worked (writing TCx). Is this: - my error (wrong observation), - by design (and documentation error), - a D60A error? Would be nice if anybody could confirm this. Oliver -- Oliver Betz, Muenchen |
|
Normal flag clearing not working when TFFCA is set (D60A)?
Started by ●March 31, 2004
Reply by ●March 31, 20042004-03-31
Oliver, With the TFFCA bit set, the normal flag clearing mechanism does not work. Regards, Gordon =============================================================== Gordon Doughman Ph: 937-438-6811 Motorola Semiconductor Fax: 937-434-7457 Field Applications Engineer Pager: 800-759-8352 Pin: 1304089 Suite 175 3131 Newmark Drive Miamisburg, OH 45342 Check out my HC12 book at: http://www.rtcbooks.com/programming.php Oliver Betz wrote: >Hello All, > >using a timer output compare interrupt, I tried to reset the >corresponding bit in TFLG1 by writing a '1' to it. > >This didn't seem to work - only the "fast clear" mechanism worked >(writing TCx). > >Is this: > >- my error (wrong observation), >- by design (and documentation error), >- a D60A error? > >Would be nice if anybody could confirm this. > >Oliver > |
|
Reply by ●April 1, 20042004-04-01
Gordon Doughman <> wrote: > With the TFFCA bit set, the normal flag clearing mechanism does not > work. Thanks for the confirmation, Gordon. Reading again "MC68HC912D60A Rev 3.0" I find that this behaviour is not documented. Do you think it's useful I file a service request, or do you have better communication channels? Oliver -- Oliver Betz, Muenchen |
|
Reply by ●April 1, 20042004-04-01
Oliver, Your best bet is to file a service request. Regards, Gordon =============================================================== Gordon Doughman Ph: 937-438-6811 Motorola Semiconductor Fax: 937-434-7457 Field Applications Engineer Pager: 800-759-8352 Pin: 1304089 Suite 175 3131 Newmark Drive Miamisburg, OH 45342 Check out my HC12 book at: http://www.rtcbooks.com/programming.php Oliver Betz wrote: >Gordon Doughman <> wrote: >>With the TFFCA bit set, the normal flag clearing mechanism does not >>work. >> > >Thanks for the confirmation, Gordon. > >Reading again "MC68HC912D60A Rev 3.0" I find that this behaviour is >not documented. Do you think it's useful I file a service request, or >do you have better communication channels? > >Oliver > |