Have anyone one tried to connect a Toshiba T6963C based LCD (128x128)
to Atmel AT91SAM9260 ? Can it be done using bit-banging. The LCD need
to be used by an application running on the Linux.
Can someone guide me how to interface(pins) and how to use the LCD
from the Linux based applications.
Thanks
Nitin
Toshiba T6963C LCD to Atmel AT91SAM9260
Started by ●January 28, 2009
Reply by ●January 28, 20092009-01-28
Hai Nitin,
For your question:
How to use the LCD from the Linux based applications.?
You can write a framebuffer driver for your LCD and use some GUI toolkits
like Qt at the application level.You can also
use something like the microwindows at the application level to access the
LCD.
Regards
T.V.R.Prasad
On Wed, Jan 28, 2009 at 3:50 PM, s.srinitin wrote:
> Have anyone one tried to connect a Toshiba T6963C based LCD (128x128)
> to Atmel AT91SAM9260 ? Can it be done using bit-banging. The LCD need
> to be used by an application running on the Linux.
>
> Can someone guide me how to interface(pins) and how to use the LCD
> from the Linux based applications.
>
> Thanks
> Nitin
>
>
>
For your question:
How to use the LCD from the Linux based applications.?
You can write a framebuffer driver for your LCD and use some GUI toolkits
like Qt at the application level.You can also
use something like the microwindows at the application level to access the
LCD.
Regards
T.V.R.Prasad
On Wed, Jan 28, 2009 at 3:50 PM, s.srinitin wrote:
> Have anyone one tried to connect a Toshiba T6963C based LCD (128x128)
> to Atmel AT91SAM9260 ? Can it be done using bit-banging. The LCD need
> to be used by an application running on the Linux.
>
> Can someone guide me how to interface(pins) and how to use the LCD
> from the Linux based applications.
>
> Thanks
> Nitin
>
>
>
