EmbeddedRelated.com
Forums

GnuArm: "Hello World" program including makefile for SAM7S256?

Started by skymab May 20, 2005
Is there a "Hello World" program which includes the makefile for
SAM7S256? I have some problemes getting started with GnuArm and SAM7

Thx in advance
Thomas Pototschnig


--- In AT91SAM7@AT91..., "skymab" <skymab@g...> wrote:
> Is there a "Hello World" program which includes the makefile for
> SAM7S256? I have some problemes getting started with GnuArm and SAM7

If you start off doing a RAM build, then anything for a SAM7S32 or S64
should work fine too. AFAIK these are sub-sets of the S256




Send email to Martin Thomas from
http://www.siwawi.arubi.uni-kl.de/avr_projects/arm_projects/

-----Original Message-----
From: AT91SAM7@AT91... [mailto:AT91SAM7@AT91...] On Behalf
Of skymab
Sent: Friday, May 20, 2005 10:54 AM
To: AT91SAM7@AT91...
Subject: [AT91SAM7] GnuArm: "Hello World" program including makefile for
SAM7S256?

Is there a "Hello World" program which includes the makefile for SAM7S256? I
have some problemes getting started with GnuArm and SAM7

Thx in advance
Thomas Pototschnig Yahoo! Groups Links


> If you start off doing a RAM build, then anything for a SAM7S32 or
S64
> should work fine too. AFAIK these are sub-sets of the S256

If you had a sample code including makefile for gnuarm which is for
the S64 or S32 I would absolutely be satisfied with ...

But I don't even find something for these controllers ...

regards
Thomas


> Send email to Martin Thomas from
> http://www.siwawi.arubi.uni-kl.de/avr_projects/arm_projects/

Thx for the hint - but I did this already 2 days ago :-)

regards
Thomas