hi,all
i'm begginer of ARM.
i want to know that:
when connect MAC chip same as RTL8201,DM9161 need different driver in
software
or MAC dont need any driver and driver only need for internal PHY.
best regard.
Amir
Need help about ETHERNETof AT91SAM7X256
Started by ●July 15, 2010
Reply by ●July 15, 20102010-07-15
On Thursday 15 July 2010 11:35:54 am amir wrote:
> hi,all
> i'm begginer of ARM.
> i want to know that:
> when connect MAC chip same as RTL8201,DM9161 need different driver in
> software or MAC dont need any driver and driver only need for internal
> PHY. best regard.
> Amir
>
You don't need any driver change. Only some mac drivers(freertos one) check
phy id and return error if it is not in the list. All you need to do is to add
the id to the list.
Also mac is able to talk to more than phy, so you need to check if addresses
are the same.
Regards,
Caglar
> hi,all
> i'm begginer of ARM.
> i want to know that:
> when connect MAC chip same as RTL8201,DM9161 need different driver in
> software or MAC dont need any driver and driver only need for internal
> PHY. best regard.
> Amir
>
You don't need any driver change. Only some mac drivers(freertos one) check
phy id and return error if it is not in the list. All you need to do is to add
the id to the list.
Also mac is able to talk to more than phy, so you need to check if addresses
are the same.
Regards,
Caglar
Reply by ●July 15, 20102010-07-15
Hi,Caglar
Thanks for your replay.
Have nice time.
-----
Amir Zendehdel
ToosAra Co.
Website : www.toosara.com
TelFax : +985337258938
GSM: : +989354059844
SKYPE : amir.toosara
MSNGR :a...@yahoo.com
-------
________________________________
From: Çağlar AKYÜZ
To: A...
Sent: Thu, July 15, 2010 12:59:49 PM
Subject: Re: [AT91SAM] Need help about ETHERNETof AT91SAM7X256
On Thursday 15 July 2010 11:35:54 am amir wrote:
> hi,all
> i'm begginer of ARM.
> i want to know that:
> when connect MAC chip same as RTL8201,DM9161 need different driver in
> software or MAC dont need any driver and driver only need for internal
> PHY. best regard.
> Amir
>
You don't need any driver change. Only some mac drivers(freertos one) check
phy id and return error if it is not in the list. All you need to do is to add
the id to the list.
Also mac is able to talk to more than phy, so you need to check if addresses
are the same.
Regards,
Caglar
Yahoo! Groups Links
Thanks for your replay.
Have nice time.
-----
Amir Zendehdel
ToosAra Co.
Website : www.toosara.com
TelFax : +985337258938
GSM: : +989354059844
SKYPE : amir.toosara
MSNGR :a...@yahoo.com
-------
________________________________
From: Çağlar AKYÜZ
To: A...
Sent: Thu, July 15, 2010 12:59:49 PM
Subject: Re: [AT91SAM] Need help about ETHERNETof AT91SAM7X256
On Thursday 15 July 2010 11:35:54 am amir wrote:
> hi,all
> i'm begginer of ARM.
> i want to know that:
> when connect MAC chip same as RTL8201,DM9161 need different driver in
> software or MAC dont need any driver and driver only need for internal
> PHY. best regard.
> Amir
>
You don't need any driver change. Only some mac drivers(freertos one) check
phy id and return error if it is not in the list. All you need to do is to add
the id to the list.
Also mac is able to talk to more than phy, so you need to check if addresses
are the same.
Regards,
Caglar
Yahoo! Groups Links