Hello,
I was looking for the DS1233 to use on my Dev. Board, but in
Buenos Aires it's not aviable (in the Electronics Store I visited in
Downtown at least). Can I replace it with another IC?
Thanks
Eze
Replacing the DS1233
Started by ●February 16, 2003
Reply by ●February 16, 20032003-02-16
Hello,
I was looking for the DS1233 to use on my Dev. Board, but in
Buenos Aires it's not aviable (in the Electronics Store I visited in
Downtown at least). Can I replace it with another IC?
Does anybody program the ATmega32 with the STK200 (ISP) or
something like that?
Thanks
Eze
I was looking for the DS1233 to use on my Dev. Board, but in
Buenos Aires it's not aviable (in the Electronics Store I visited in
Downtown at least). Can I replace it with another IC?
Does anybody program the ATmega32 with the STK200 (ISP) or
something like that?
Thanks
Eze
Reply by ●February 16, 20032003-02-16
--- acetoel <no_reply@no_r...> wrote:
> I was looking for the DS1233 to use on my Dev. Board, but in
> Buenos Aires it's not aviable (in the Electronics Store I visited in
> Downtown at least). Can I replace it with another IC?
Sure, there are probably a few million to pick from <grin>. Seriously, look
at some of the online distributors or semiconductor manufacturers for "power
management" or "supervisory" ICs.
If you want some more help, let us know what you need for your application
and maybe someone can suggest something to look for. =====
Patrick Timlin ptimlin@ptim...
http://www.geocities.com/ptimlin/
__________________________________________________
> I was looking for the DS1233 to use on my Dev. Board, but in
> Buenos Aires it's not aviable (in the Electronics Store I visited in
> Downtown at least). Can I replace it with another IC?
Sure, there are probably a few million to pick from <grin>. Seriously, look
at some of the online distributors or semiconductor manufacturers for "power
management" or "supervisory" ICs.
If you want some more help, let us know what you need for your application
and maybe someone can suggest something to look for. =====
Patrick Timlin ptimlin@ptim...
http://www.geocities.com/ptimlin/
__________________________________________________
Reply by ●February 17, 20032003-02-17
I want a chip that makes Brown Out Reset for the ATMega Series. At
more or less 4V or 3.3V. Thanks
Ezequiel
--- In avrclub@avrc..., "Patrick A. Timlin" <ptimlin@y...>
wrote:
> --- acetoel <no_reply@no_r...> wrote:
> > I was looking for the DS1233 to use on my Dev. Board, but in
> > Buenos Aires it's not aviable (in the Electronics Store I
visited in
> > Downtown at least). Can I replace it with another IC?
>
> Sure, there are probably a few million to pick from <grin>.
Seriously, look
> at some of the online distributors or semiconductor manufacturers
for "power
> management" or "supervisory" ICs.
>
> If you want some more help, let us know what you need for your
application
> and maybe someone can suggest something to look for. > =====
> Patrick Timlin ptimlin@y...
> http://www.geocities.com/ptimlin/
>
> __________________________________________________
>
more or less 4V or 3.3V. Thanks
Ezequiel
--- In avrclub@avrc..., "Patrick A. Timlin" <ptimlin@y...>
wrote:
> --- acetoel <no_reply@no_r...> wrote:
> > I was looking for the DS1233 to use on my Dev. Board, but in
> > Buenos Aires it's not aviable (in the Electronics Store I
visited in
> > Downtown at least). Can I replace it with another IC?
>
> Sure, there are probably a few million to pick from <grin>.
Seriously, look
> at some of the online distributors or semiconductor manufacturers
for "power
> management" or "supervisory" ICs.
>
> If you want some more help, let us know what you need for your
application
> and maybe someone can suggest something to look for. > =====
> Patrick Timlin ptimlin@y...
> http://www.geocities.com/ptimlin/
>
> __________________________________________________
>
Reply by ●February 17, 20032003-02-17
try using DS 1813
----- Original Message -----
From: acetoel <no_reply@no_r...>
To: <avrclub@avrc...>
Sent: Monday, February 17, 2003 8:25 PM
Subject: Re: [AVR club] Replacing the DS1233 > I want a chip that makes Brown Out Reset for the ATMega Series. At
> more or less 4V or 3.3V. Thanks
> Ezequiel
>
> --- In avrclub@avrc..., "Patrick A. Timlin" <ptimlin@y...>
> wrote:
> > --- acetoel <no_reply@no_r...> wrote:
> > > I was looking for the DS1233 to use on my Dev. Board, but in
> > > Buenos Aires it's not aviable (in the Electronics Store I
> visited in
> > > Downtown at least). Can I replace it with another IC?
> >
> > Sure, there are probably a few million to pick from <grin>.
> Seriously, look
> > at some of the online distributors or semiconductor manufacturers
> for "power
> > management" or "supervisory" ICs.
> >
> > If you want some more help, let us know what you need for your
> application
> > and maybe someone can suggest something to look for.
> >
> >
> > =====
> > Patrick Timlin ptimlin@y...
> > http://www.geocities.com/ptimlin/
> >
> > __________________________________________________
> > To unsubscribe from this group, send an email to:
> avrclub-unsubscribe@avrc... >
> ">http://docs.yahoo.com/info/terms/ >
>
----- Original Message -----
From: acetoel <no_reply@no_r...>
To: <avrclub@avrc...>
Sent: Monday, February 17, 2003 8:25 PM
Subject: Re: [AVR club] Replacing the DS1233 > I want a chip that makes Brown Out Reset for the ATMega Series. At
> more or less 4V or 3.3V. Thanks
> Ezequiel
>
> --- In avrclub@avrc..., "Patrick A. Timlin" <ptimlin@y...>
> wrote:
> > --- acetoel <no_reply@no_r...> wrote:
> > > I was looking for the DS1233 to use on my Dev. Board, but in
> > > Buenos Aires it's not aviable (in the Electronics Store I
> visited in
> > > Downtown at least). Can I replace it with another IC?
> >
> > Sure, there are probably a few million to pick from <grin>.
> Seriously, look
> > at some of the online distributors or semiconductor manufacturers
> for "power
> > management" or "supervisory" ICs.
> >
> > If you want some more help, let us know what you need for your
> application
> > and maybe someone can suggest something to look for.
> >
> >
> > =====
> > Patrick Timlin ptimlin@y...
> > http://www.geocities.com/ptimlin/
> >
> > __________________________________________________
> > To unsubscribe from this group, send an email to:
> avrclub-unsubscribe@avrc... >
> ">http://docs.yahoo.com/info/terms/ >
>
Reply by ●February 17, 20032003-02-17
Hi
Search www.ebay.com for DS1233 there is a small bag of then up for auction.
Don
Marek Kraft wrote:
>try using DS 1813
>
>----- Original Message -----
>From: acetoel <no_reply@no_r...>
>To: <avrclub@avrc...>
>Sent: Monday, February 17, 2003 8:25 PM
>Subject: Re: [AVR club] Replacing the DS1233 >
>
>>I want a chip that makes Brown Out Reset for the ATMega Series. At
>>more or less 4V or 3.3V. Thanks
>>Ezequiel
>>
>>--- In avrclub@avrc..., "Patrick A. Timlin" <ptimlin@y...>
>>wrote:
>>
>>
>>>--- acetoel <no_reply@no_r...> wrote:
>>>
>>>
>>>> I was looking for the DS1233 to use on my Dev. Board, but in
>>>>Buenos Aires it's not aviable (in the Electronics Store I
>>>>
>>>>
>>visited in
>>
>>
>>>>Downtown at least). Can I replace it with another IC?
>>>>
>>>>
>>>Sure, there are probably a few million to pick from <grin>.
>>>
>>>
>>Seriously, look
>>
>>
>>>at some of the online distributors or semiconductor manufacturers
>>>
>>>
>>for "power
>>
>>
>>>management" or "supervisory" ICs.
>>>
>>>If you want some more help, let us know what you need for your
>>>
>>>
>>application
>>
>>
>>>and maybe someone can suggest something to look for.
>>>
>>>
>>>=====
>>>Patrick Timlin ptimlin@y...
>>>http://www.geocities.com/ptimlin/
>>>
>>>__________________________________________________
>>>
>>>
>>
>>To unsubscribe from this group, send an email to:
>>avrclub-unsubscribe@avrc...
>>
>>
>>
>>">http://docs.yahoo.com/info/terms/
>>
>>
>>
>>
>>
> >
>
>To unsubscribe from this group, send an email to:
>avrclub-unsubscribe@avrc... >
>">http://docs.yahoo.com/info/terms/
Search www.ebay.com for DS1233 there is a small bag of then up for auction.
Don
Marek Kraft wrote:
>try using DS 1813
>
>----- Original Message -----
>From: acetoel <no_reply@no_r...>
>To: <avrclub@avrc...>
>Sent: Monday, February 17, 2003 8:25 PM
>Subject: Re: [AVR club] Replacing the DS1233 >
>
>>I want a chip that makes Brown Out Reset for the ATMega Series. At
>>more or less 4V or 3.3V. Thanks
>>Ezequiel
>>
>>--- In avrclub@avrc..., "Patrick A. Timlin" <ptimlin@y...>
>>wrote:
>>
>>
>>>--- acetoel <no_reply@no_r...> wrote:
>>>
>>>
>>>> I was looking for the DS1233 to use on my Dev. Board, but in
>>>>Buenos Aires it's not aviable (in the Electronics Store I
>>>>
>>>>
>>visited in
>>
>>
>>>>Downtown at least). Can I replace it with another IC?
>>>>
>>>>
>>>Sure, there are probably a few million to pick from <grin>.
>>>
>>>
>>Seriously, look
>>
>>
>>>at some of the online distributors or semiconductor manufacturers
>>>
>>>
>>for "power
>>
>>
>>>management" or "supervisory" ICs.
>>>
>>>If you want some more help, let us know what you need for your
>>>
>>>
>>application
>>
>>
>>>and maybe someone can suggest something to look for.
>>>
>>>
>>>=====
>>>Patrick Timlin ptimlin@y...
>>>http://www.geocities.com/ptimlin/
>>>
>>>__________________________________________________
>>>
>>>
>>
>>To unsubscribe from this group, send an email to:
>>avrclub-unsubscribe@avrc...
>>
>>
>>
>>">http://docs.yahoo.com/info/terms/
>>
>>
>>
>>
>>
> >
>
>To unsubscribe from this group, send an email to:
>avrclub-unsubscribe@avrc... >
>">http://docs.yahoo.com/info/terms/
Reply by ●February 17, 20032003-02-17
