EmbeddedRelated.com
Forums

LPC2478 LCD controller on internal RAM

Started by sebfr74 October 23, 2012
Newhaven Display (http://www.newhavendisplay.com/tfts-c-1.html) also has
some interesting options around 20 a pice. I'm using one of theirs 4.3''
TFTs with only 3V3 power supply and signals (some other voltage for
backlight) and a single 40 pin FPC connector.
You can find them at mouser with the 4.3'' priced a little above 20 per
unit.

Regards,
Bernardo Marques.
On Fri, Oct 26, 2012 at 10:39 AM, roelof 't Hooft wrote:

> **
> On Thu, 2012-10-25 at 08:47 +0200, Sebastien Jacquemard wrote:
> > I use a Tianma display
> > with integrated resistive touchscreen at less than 20EUR / 200 parts
> >
> > (the Tianma is interesting because it use a single 30 pin connector for
> > display signals, touchscreen and led backlight. Also it use a single
> > 3.3v power supply and 3.3v signal)
>
> Hi Sebastien,
>
> Can you please send me the type number of the tianma display ?
>
> thanks,
>
> roelof
>
>
>


An Engineer's Guide to the LPC2100 Series

On Fri, 2012-10-26 at 10:54 +0100, Bernardo Marques wrote:
> Newhaven Display (http://www.newhavendisplay.com/tfts-c-1.html) also has
> some interesting options around 20 a pice. I'm using one of theirs 4.3''
> TFTs with only 3V3 power supply and signals (some other voltage for
> backlight) and a single 40 pin FPC connector.
> You can find them at mouser with the 4.3'' priced a little above 20 per
> unit.

Bernardo,

Thank you, I'll have a look.

roelof

Roelof,

Tinama reference is TM043NBH02.
I try also a New Haven display but tianma has better viewing angles.
I will receive today a devlopment kit from embedded artist with LPC4357
+ 4.3" tft display. So I will try the "single chip" solution.

Sebastien
Le 26/10/2012 11:39, roelof 't Hooft a écrit :
> On Thu, 2012-10-25 at 08:47 +0200, Sebastien Jacquemard wrote:
> > I use a Tianma display
> > with integrated resistive touchscreen at less than 20EUR / 200 parts
> >
> > (the Tianma is interesting because it use a single 30 pin connector for
> > display signals, touchscreen and led backlight. Also it use a single
> > 3.3v power supply and 3.3v signal)
>
> Hi Sebastien,
>
> Can you please send me the type number of the tianma display ?
>
> thanks,
>
> roelof
>
>