|
Anyone having experience with connecting PIC18 MCU to graphic LCD based
on SED1335 controller using GUI driver library from Ramtex? Does it work as described on http://www.ramtex.dk/glcd/glcd1335.htm ? Or I can just write my own code for all of this? Also... is there some PIC18 based product using graphic LCD (240x128 or similar) that I can see on the Internet (link?) just to get some idea of what is possible and what is not possible when graphic LCD is used? Regards, Igor |
|
|
PIC18, SED1335 and Ramtex GUI
Started by ●July 29, 2004
Reply by ●July 29, 20042004-07-29
|
I am very curious about that product too. It looks like good value if it works. Bruce Partridge http://www.rebreather.ca > -----Original Message----- > From: Igor Janjatovic [mailto:] > Sent: Thursday, July 29, 2004 3:29 PM > To: > Subject: [piclist] PIC18, SED1335 and Ramtex GUI > Anyone having experience with connecting PIC18 MCU to graphic LCD based on > SED1335 controller using GUI driver library from Ramtex? Does it work as > described on http://www.ramtex.dk/glcd/glcd1335.htm ? Or I can > just write my > own code for all of this? > > Also... is there some PIC18 based product using graphic LCD (240x128 or > similar) that I can see on the Internet (link?) just to get some idea of > what is possible and what is not possible when graphic LCD is used? > > Regards, > Igor > > to unsubscribe, go to http://www.yahoogroups.com and follow the > instructions > Yahoo! Groups Links > --- > Incoming mail is certified Virus Free. > Checked by AVG anti-virus system (http://www.grisoft.com). > Version: 6.0.720 / Virus Database: 476 - Release Date: 7/14/2004 > --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.720 / Virus Database: 476 - Release Date: 7/14/2004 |
