I am developing a project for reading wiegand card readers, I'm using the
Rabbit RCM5750, did some research and noticed that there is a Dynamic C 9
wiegand.lib but I'm using DynamicC-10 and found that wiegand.lib, if
possible someone could send me? e-mail: d...@gmail.com
Thanks
Quinelato, Danilo
wiegand.lib
Started by ●April 1, 2011
Reply by ●April 1, 20112011-04-01
Hello Xol,
I would love the lib, at first I would use an HID reader wiegand 26bits,
DATA0 and DATA1 using only a resistor to pull up and turned right into the
port of the Rabbit, the codes that I found on the web do not work very well,
but so have the lib believe I get something that works well.
Thank you for your attention
Quinelato
2011/4/1 danilo62x
> I am developing a project for reading wiegand card readers, I'm using the
> Rabbit RCM5750, did some research and noticed that there is a Dynamic C 9
> wiegand.lib but I'm using DynamicC-10 and found that wiegand.lib, if
> possible someone could send me? e-mail: d...@gmail.com
>
> Thanks
>
> Quinelato, Danilo
>
>
>
I would love the lib, at first I would use an HID reader wiegand 26bits,
DATA0 and DATA1 using only a resistor to pull up and turned right into the
port of the Rabbit, the codes that I found on the web do not work very well,
but so have the lib believe I get something that works well.
Thank you for your attention
Quinelato
2011/4/1 danilo62x
> I am developing a project for reading wiegand card readers, I'm using the
> Rabbit RCM5750, did some research and noticed that there is a Dynamic C 9
> wiegand.lib but I'm using DynamicC-10 and found that wiegand.lib, if
> possible someone could send me? e-mail: d...@gmail.com
>
> Thanks
>
> Quinelato, Danilo
>
>
>