Will Dynamic C run on Windows 7, 64-bit? Do you have to use WinXP Mode?
Steve
Using DC on Win7 64-bit
Started by ●January 26, 2012
Reply by ●January 26, 20122012-01-26
I used on win64 no problem
On Jan 26, 2012 10:47 PM, "seecwriter" wrote:
> **
> Will Dynamic C run on Windows 7, 64-bit? Do you have to use WinXP Mode?
>
> Steve
>
>
>
On Jan 26, 2012 10:47 PM, "seecwriter" wrote:
> **
> Will Dynamic C run on Windows 7, 64-bit? Do you have to use WinXP Mode?
>
> Steve
>
>
>
Reply by ●January 26, 20122012-01-26
I concur, I have it running with Windows 7 64bit for both DynC 9.62 and DynC
10.64 without any issues. No need for compatibility mode with either of
them.
Dave.
From: r... [mailto:r...] On
Behalf Of Phil D
Sent: 27 January 2012 06:05
To: r...
Subject: Re: [rabbit-semi] Using DC on Win7 64-bit
I used on win64 no problem
On Jan 26, 2012 10:47 PM, "seecwriter" wrote:
Will Dynamic C run on Windows 7, 64-bit? Do you have to use WinXP Mode?
Steve
10.64 without any issues. No need for compatibility mode with either of
them.
Dave.
From: r... [mailto:r...] On
Behalf Of Phil D
Sent: 27 January 2012 06:05
To: r...
Subject: Re: [rabbit-semi] Using DC on Win7 64-bit
I used on win64 no problem
On Jan 26, 2012 10:47 PM, "seecwriter" wrote:
Will Dynamic C run on Windows 7, 64-bit? Do you have to use WinXP Mode?
Steve
Reply by ●March 5, 20122012-03-05
So, for those that responded positively to my question of how well DC
worked on Win7, perhaps you can explain why DC and the RFU don't work
work on Win7 when using a standard RS-232 port for communication.
I've even run DC in WinXP mode, and it still doesn't work with RS-232.
To clarify, its the version 10.xx series that doesn't work. DC 9.25
works fine over RS-232.
Steve
--- In r..., "Dave McLaughlin" wrote:
>
> I concur, I have it running with Windows 7 64bit for both DynC 9.62 and DynC
> 10.64 without any issues. No need for compatibility mode with either of
> them.
>
>
>
> Dave.
>
>
>
> From: r... [mailto:r...] On
> Behalf Of Phil D
> Sent: 27 January 2012 06:05
> To: r...
> Subject: Re: [rabbit-semi] Using DC on Win7 64-bit
>
>
>
>
>
> I used on win64 no problem
>
> On Jan 26, 2012 10:47 PM, "seecwriter" wrote:
>
>
>
> Will Dynamic C run on Windows 7, 64-bit? Do you have to use WinXP Mode?
>
> Steve
>
worked on Win7, perhaps you can explain why DC and the RFU don't work
work on Win7 when using a standard RS-232 port for communication.
I've even run DC in WinXP mode, and it still doesn't work with RS-232.
To clarify, its the version 10.xx series that doesn't work. DC 9.25
works fine over RS-232.
Steve
--- In r..., "Dave McLaughlin" wrote:
>
> I concur, I have it running with Windows 7 64bit for both DynC 9.62 and DynC
> 10.64 without any issues. No need for compatibility mode with either of
> them.
>
>
>
> Dave.
>
>
>
> From: r... [mailto:r...] On
> Behalf Of Phil D
> Sent: 27 January 2012 06:05
> To: r...
> Subject: Re: [rabbit-semi] Using DC on Win7 64-bit
>
>
>
>
>
> I used on win64 no problem
>
> On Jan 26, 2012 10:47 PM, "seecwriter" wrote:
>
>
>
> Will Dynamic C run on Windows 7, 64-bit? Do you have to use WinXP Mode?
>
> Steve
>
Reply by ●March 5, 20122012-03-05
I don't have a hardware serial port on this machine ive been using
usb/com
devboard when ive had to reprogram a module from this computer. so i cant
really test hardware serial for you.
im surprised virtual XP doesn't do it, is xp taking full control over the
hardware com port.
sorry i cant be much help
On 5 March 2012 16:30, seecwriter wrote:
> **
> So, for those that responded positively to my question of how well DC
> worked on Win7, perhaps you can explain why DC and the RFU don't work
> work on Win7 when using a standard RS-232 port for communication.
>
> I've even run DC in WinXP mode, and it still doesn't work with RS-232.
>
> To clarify, its the version 10.xx series that doesn't work. DC 9.25
> works fine over RS-232.
>
> Steve
> --- In r..., "Dave McLaughlin"
> wrote:
> >
> > I concur, I have it running with Windows 7 64bit for both DynC 9.62 and
> DynC
> > 10.64 without any issues. No need for compatibility mode with either of
> > them.
> >
> >
> >
> > Dave.
>
> >
> >
> >
> > From: r... [mailto:r...]
> On
> > Behalf Of Phil D
> > Sent: 27 January 2012 06:05
> > To: r...
> > Subject: Re: [rabbit-semi] Using DC on Win7 64-bit
> >
> >
> >
> >
> >
> > I used on win64 no problem
> >
> > On Jan 26, 2012 10:47 PM, "seecwriter" wrote:
> >
> >
> >
> > Will Dynamic C run on Windows 7, 64-bit? Do you have to use WinXP Mode?
> >
> > Steve
> >
>
devboard when ive had to reprogram a module from this computer. so i cant
really test hardware serial for you.
im surprised virtual XP doesn't do it, is xp taking full control over the
hardware com port.
sorry i cant be much help
On 5 March 2012 16:30, seecwriter wrote:
> **
> So, for those that responded positively to my question of how well DC
> worked on Win7, perhaps you can explain why DC and the RFU don't work
> work on Win7 when using a standard RS-232 port for communication.
>
> I've even run DC in WinXP mode, and it still doesn't work with RS-232.
>
> To clarify, its the version 10.xx series that doesn't work. DC 9.25
> works fine over RS-232.
>
> Steve
> --- In r..., "Dave McLaughlin"
> wrote:
> >
> > I concur, I have it running with Windows 7 64bit for both DynC 9.62 and
> DynC
> > 10.64 without any issues. No need for compatibility mode with either of
> > them.
> >
> >
> >
> > Dave.
>
> >
> >
> >
> > From: r... [mailto:r...]
> On
> > Behalf Of Phil D
> > Sent: 27 January 2012 06:05
> > To: r...
> > Subject: Re: [rabbit-semi] Using DC on Win7 64-bit
> >
> >
> >
> >
> >
> > I used on win64 no problem
> >
> > On Jan 26, 2012 10:47 PM, "seecwriter" wrote:
> >
> >
> >
> > Will Dynamic C run on Windows 7, 64-bit? Do you have to use WinXP Mode?
> >
> > Steve
> >
>
Reply by ●March 5, 20122012-03-05
Hi Steve,
Sorry to see you are still having issues.
Sadly my PC doesn't have any native serial ports, like a lot of them these
days so I just use a USB to serial. My USB to Serial is connected via the
HUB on my Dell monitor and it works fine.
If you don't get any joy or answers, you might be just as easy to get a
USB-Serial and see if that works. I would stick with one that uses to FT232
or such like from FTDI as I have found these to be reliable with DC.
Cheers
Dave.
From: r... [mailto:r...] On
Behalf Of seecwriter
Sent: 05 March 2012 23:30
To: r...
Subject: [rabbit-semi] Re: Using DC on Win7 64-bit
So, for those that responded positively to my question of how well DC
worked on Win7, perhaps you can explain why DC and the RFU don't work
work on Win7 when using a standard RS-232 port for communication.
I've even run DC in WinXP mode, and it still doesn't work with RS-232.
To clarify, its the version 10.xx series that doesn't work. DC 9.25
works fine over RS-232.
Steve
Sorry to see you are still having issues.
Sadly my PC doesn't have any native serial ports, like a lot of them these
days so I just use a USB to serial. My USB to Serial is connected via the
HUB on my Dell monitor and it works fine.
If you don't get any joy or answers, you might be just as easy to get a
USB-Serial and see if that works. I would stick with one that uses to FT232
or such like from FTDI as I have found these to be reliable with DC.
Cheers
Dave.
From: r... [mailto:r...] On
Behalf Of seecwriter
Sent: 05 March 2012 23:30
To: r...
Subject: [rabbit-semi] Re: Using DC on Win7 64-bit
So, for those that responded positively to my question of how well DC
worked on Win7, perhaps you can explain why DC and the RFU don't work
work on Win7 when using a standard RS-232 port for communication.
I've even run DC in WinXP mode, and it still doesn't work with RS-232.
To clarify, its the version 10.xx series that doesn't work. DC 9.25
works fine over RS-232.
Steve
