Forums

needed programmer for (HCS12X) MC9S12XDT512CAA

Started by mohan kumar December 8, 2009
hello, so far, i was using PBMCUSLK Project board and SLKS12XDT512. for learning purposes, now i am developing a accelerometer using mc9s12xdt512caa microcontroller along with lcd display. for the above i need seperate programmer for loading my codes into the controller. can you suggest me a low cost programmer available for the same controller. Till now i usedP&Emultilink cyclone pro.which is coming along with the project board (PBMCUSLK).
Regards,Mohan Kumar. R.

New Email names for you!
Get the Email name you've always wanted on the new @ymail and @rocketmail.
Hurry before someone else does!
http://mail.promotions.yahoo.com/newdomains/aa/



Hi,
 
I can do for you, whats your contact number. Actually right now I am in rush, see you later on.
 
Thanks

Anil Kumar Redhu
416-648-1910

--- On Tue, 12/8/09, mohan kumar wrote:
From: mohan kumar
Subject: [68HC12] needed programmer for (HCS12X) MC9S12XDT512CAA
To: "hcs12" <6...>
Received: Tuesday, December 8, 2009, 2:46 PM
 

hello,         so far, i was using PBMCUSLK Project board and SLKS12XDT512. for learning purposes, now i am developing a accelerometer using mc9s12xdt512caa microcontroller along with lcd display.         for the above i need seperate programmer for loading my codes into the controller. can you suggest me a low cost programmer available for the same controller. Till now i used P&E multilink cyclone pro. which is coming along with the project board (PBMCUSLK).
Regards,Mohan Kumar. R.

New Email names for you!
Get the Email name you've always wanted on the new @ymail and @rocketmail.
Hurry before someone else does!
http://mail. promotions. yahoo.com/ newdomains/ aa/



__________________________________________________________________
Looking for the perfect gift? Give the gift of Flickr!

http://www.flickr.com/gift/



what is the cost of it? And now am in coimbatore, Tamil Nadu, India.

--- On Wed, 9/12/09, Anil Redhu wrote:

From: Anil Redhu
Subject: Re: [68HC12] needed programmer for (HCS12X) MC9S12XDT512CAA
To: 6...
Date: Wednesday, 9 December, 2009, 10:37 PM


 





Hi,

 

I can do for you, whats your contact number. Actually right now I am in rush, see you later on.

 

Thanks

Anil Kumar Redhu

416-648-1910

--- On Tue, 12/8/09, mohan kumar wrote:

From: mohan kumar

Subject: [68HC12] needed programmer for (HCS12X) MC9S12XDT512CAA

To: "hcs12" <68HC12@yahoogroups. com>

Received: Tuesday, December 8, 2009, 2:46 PM

 

hello,         so far, i was using PBMCUSLK Project board and SLKS12XDT512. for learning purposes, now i am developing a accelerometer using mc9s12xdt512caa microcontroller along with lcd display.         for the above i need seperate programmer for loading my codes into the controller. can you suggest me a low cost programmer available for the same controller. Till now i used P&E multilink cyclone pro. which is coming along with the project board (PBMCUSLK).

Regards,Mohan Kumar. R.

New Email names for you!

Get the Email name you've always wanted on the new @ymail and @rocketmail.

Hurry before someone else does!

http://mail. promotions. yahoo.com/ newdomains/ aa/



____________ _________ _________ _________ _________ _________ _

Looking for the perfect gift? Give the gift of Flickr!

http://www.flickr. com/gift/












New Email names for you!
Get the Email name you've always wanted on the new @ymail and @rocketmail.
Hurry before someone else does!
http://mail.promotions.yahoo.com/newdomains/aa/



Well I am in Toronto, help is free for you, let me know details of your project. I have one 9S12DP512 card, I can program on that, I donot have the sensor

Anil Kumar Redhu
416-648-1910

--- On Wed, 12/9/09, mohan kumar wrote:
From: mohan kumar
Subject: Re: [68HC12] needed programmer for (HCS12X) MC9S12XDT512CAA
To: 6...
Received: Wednesday, December 9, 2009, 12:45 PM
 

what is the cost of it? And now am in coimbatore, Tamil Nadu, India.

--- On Wed, 9/12/09, Anil Redhu wrote:

From: Anil Redhu
Subject: Re: [68HC12] needed programmer for (HCS12X) MC9S12XDT512CAA
To: 68HC12@yahoogroups. com
Date: Wednesday, 9 December, 2009, 10:37 PM

 

Hi,

 

I can do for you, whats your contact number. Actually right now I am in rush, see you later on.

 

Thanks

Anil Kumar Redhu

416-648-1910

--- On Tue, 12/8/09, mohan kumar wrote:

From: mohan kumar

Subject: [68HC12] needed programmer for (HCS12X) MC9S12XDT512CAA

To: "hcs12" <68HC12@yahoogroups . com>

Received: Tuesday, December 8, 2009, 2:46 PM

 

hello,         so far, i was using PBMCUSLK Project board and SLKS12XDT512. for learning purposes, now i am developing a accelerometer using mc9s12xdt512caa microcontroller along with lcd display.         for the above i need seperate programmer for loading my codes into the controller. can you suggest me a low cost programmer available for the same controller. Till now i used P&E multilink cyclone pro. which is coming along with the project board (PBMCUSLK).

Regards,Mohan Kumar. R.

New Email names for you!

Get the Email name you've always wanted on the new @ymail and @rocketmail.

Hurry before someone else does!

http://mail. promotions. yahoo.com/ newdomains/ aa/



____________ _________ _________ _________ _________ _________ _

Looking for the perfect gift? Give the gift of Flickr!

http://www.flickr. com/gift/



New Email names for you!
Get the Email name you've always wanted on the new @ymail and @rocketmail.
Hurry before someone else does!
http://mail. promotions. yahoo.com/ newdomains/ aa/



__________________________________________________________________
Looking for the perfect gift? Give the gift of Flickr!

http://www.flickr.com/gift/



Hi,let me clearly explain what i need. I am using freescale HCS12 microcontroller(mc9s12xdt512), i have the student learning kit and PBMCUSLK (project board) with me. And am now using codewarrior IDE. P&E BDM multilink cyclone pro debugger is in-built with the Project board. Now for loading codes to microcontroller and debugging being done by inserting the student learning kit to the project board which has Debugger hardware built in through USB.
I have developed C codes. I need a separate hardware debugger for debugging (loading my codes and testing) my application. Anyone located in INDIA please help me to get the debugger.

I don't need a programmer, It was my mistake, I need debugger.
regards,Mohan Kumar.R
--- On Thu, 10/12/09, Anil Redhu wrote:

From: Anil Redhu
Subject: Re: [68HC12] needed programmer for (HCS12X) MC9S12XDT512CAA
To: 6...
Date: Thursday, 10 December, 2009, 8:13 PM


 





Well I am in Toronto, help is free for you, let me know details of your project. I have one 9S12DP512 card, I can program on that, I donot have the sensor

Anil Kumar Redhu

416-648-1910

--- On Wed, 12/9/09, mohan kumar wrote:

From: mohan kumar

Subject: Re: [68HC12] needed programmer for (HCS12X) MC9S12XDT512CAA

To: 68HC12@yahoogroups. com

Received: Wednesday, December 9, 2009, 12:45 PM

 

what is the cost of it? And now am in coimbatore, Tamil Nadu, India.

--- On Wed, 9/12/09, Anil Redhu wrote:

From: Anil Redhu

Subject: Re: [68HC12] needed programmer for (HCS12X) MC9S12XDT512CAA

To: 68HC12@yahoogroups. com

Date: Wednesday, 9 December, 2009, 10:37 PM

 

Hi,

 

I can do for you, whats your contact number. Actually right now I am in rush, see you later on.

 

Thanks

Anil Kumar Redhu

416-648-1910

--- On Tue, 12/8/09, mohan kumar wrote:

From: mohan kumar

Subject: [68HC12] needed programmer for (HCS12X) MC9S12XDT512CAA

To: "hcs12" <68HC12@yahoogroups . com>

Received: Tuesday, December 8, 2009, 2:46 PM

 

hello,         so far, i was using PBMCUSLK Project board and SLKS12XDT512. for learning purposes, now i am developing a accelerometer using mc9s12xdt512caa microcontroller along with lcd display.         for the above i need seperate programmer for loading my codes into the controller. can you suggest me a low cost programmer available for the same controller. Till now i used P&E multilink cyclone pro. which is coming along with the project board (PBMCUSLK).

Regards,Mohan Kumar. R.

New Email names for you!

Get the Email name you've always wanted on the new @ymail and @rocketmail.

Hurry before someone else does!

http://mail. promotions. yahoo.com/ newdomains/ aa/



____________ _________ _________ _________ _________ _________ _

Looking for the perfect gift? Give the gift of Flickr!

http://www.flickr. com/gift/



New Email names for you!

Get the Email name you've always wanted on the new @ymail and @rocketmail.

Hurry before someone else does!

http://mail. promotions. yahoo.com/ newdomains/ aa/



____________ _________ _________ _________ _________ _________ _

Looking for the perfect gift? Give the gift of Flickr!

http://www.flickr. com/gift/












Get your new Email address!
Grab the Email name you've always wanted before someone else does!
http://mail.promotions.yahoo.com/newdomains/aa/



Hi,      let me clearly explain what i need. I am using freescale HCS12 microcontroller( mc9s12xdt512) , i have the student learning kit and PBMCUSLK (project board) with me. And am now using codewarrior IDE. P&E BDM multilink cyclone pro debugger is in-built with the Project board. Now for loading codes to microcontroller and debugging being done by inserting the student learning kit to the project board which has Debugger hardware built in and through USB.

I have developed C codes. I need a separate hardware debugger for debugging (loading my codes and testing) my application. Anyone located in INDIA please help me to get the debugger.

I don't need a programmer, It was my mistake, I need debugger.

regards,Mohan Kumar.R
--- On Thu, 10/12/09, Anil Redhu wrote:

From: Anil Redhu
Subject: Re: [68HC12] needed programmer for (HCS12X) MC9S12XDT512CAA
To: 6...
Date: Thursday, 10 December, 2009, 8:13 PM


 





Well I am in Toronto, help is free for you, let me know details of your project. I have one 9S12DP512 card, I can program on that, I donot have the sensor

Anil Kumar Redhu

416-648-1910

--- On Wed, 12/9/09, mohan kumar wrote:

From: mohan kumar

Subject: Re: [68HC12] needed programmer for (HCS12X) MC9S12XDT512CAA

To: 68HC12@yahoogroups. com

Received: Wednesday, December 9, 2009, 12:45 PM

 

what is the cost of it? And now am in coimbatore, Tamil Nadu, India.

--- On Wed, 9/12/09, Anil Redhu wrote:

From: Anil Redhu

Subject: Re: [68HC12] needed programmer for (HCS12X) MC9S12XDT512CAA

To: 68HC12@yahoogroups. com

Date: Wednesday, 9 December, 2009, 10:37 PM

 

Hi,

 

I can do for you, whats your contact number. Actually right now I am in rush, see you later on.

 

Thanks

Anil Kumar Redhu

416-648-1910

--- On Tue, 12/8/09, mohan kumar wrote:

From: mohan kumar

Subject: [68HC12] needed programmer for (HCS12X) MC9S12XDT512CAA

To: "hcs12" <68HC12@yahoogroups . com>

Received: Tuesday, December 8, 2009, 2:46 PM

 

hello,         so far, i was using PBMCUSLK Project board and SLKS12XDT512. for learning purposes, now i am developing a accelerometer using mc9s12xdt512caa microcontroller along with lcd display.         for the above i need seperate programmer for loading my codes into the controller. can you suggest me a low cost programmer available for the same controller. Till now i used P&E multilink cyclone pro. which is coming along with the project board (PBMCUSLK).

Regards,Mohan Kumar. R.

New Email names for you!

Get the Email name you've always wanted on the new @ymail and @rocketmail.

Hurry before someone else does!

http://mail. promotions. yahoo.com/ newdomains/ aa/



____________ _________ _________ _________ _________ _________ _

Looking for the perfect gift? Give the gift of Flickr!

http://www.flickr. com/gift/



New Email names for you!

Get the Email name you've always wanted on the new @ymail and @rocketmail.

Hurry before someone else does!

http://mail. promotions. yahoo.com/ newdomains/ aa/



____________ _________ _________ _________ _________ _________ _

Looking for the perfect gift? Give the gift of Flickr!

http://www.flickr. com/gift/












New Email names for you!
Get the Email name you've always wanted on the new @ymail and @rocketmail.
Hurry before someone else does!
http://mail.promotions.yahoo.com/newdomains/aa/



Hi,

If I understand, you are looking for a separate debugger ?

For a couple of years, I use
- ImageCraft ICC12 C compiler, very good and easy to use, and not very
expensive
- NoIce debugger, which allows me to flash program, run program, watch C and
assembly code, put breakpoints, examine ram and flash datas, structures...
All I need to debug big programs. Very easy to use too, very nice !
NoIce is not very expensive...

Hope this helps.
Joel Petrique

-----Message d'origine-----
De: 6... [mailto:6...] De la part de
mohan kumar
Envoy vendredi 11 dembre 2009 04:19
: 6...
Objet: Re: [68HC12] needed DEBUGGER for (HCS12X) MC9S12XDT512CAA

Hi, let me clearly explain what i need. I am using freescale HCS12
microcontroller( mc9s12xdt512) , i have the student learning kit and
PBMCUSLK (project board) with me. And am now using codewarrior IDE.P&EBDM
multilink cyclone prodebugger is in-built with the Project board. Now for
loading codes to microcontroller and debugging being done by inserting the
student learning kit to the project board which has Debugger hardware built
in and through USB.

I have developed C codes. I need a separate hardware debugger for debugging
(loading my codes and testing) my application. Anyone located in INDIA
please help me to get the debugger.

I don't need a programmer, It was my mistake, I need debugger.

regards,Mohan Kumar.R
--- On Thu, 10/12/09, Anil Redhu wrote:

From: Anil Redhu
Subject: Re: [68HC12] needed programmer for (HCS12X) MC9S12XDT512CAA
To: 6...
Date: Thursday, 10 December, 2009, 8:13 PM








Well I am in Toronto, help is free for you, let me know details of
your project. I have one 9S12DP512 card, I can program on that, I donot have
the sensor

Anil Kumar Redhu

416-648-1910

--- On Wed, 12/9/09, mohan kumar wrote:

From: mohan kumar

Subject: Re: [68HC12] needed programmer for (HCS12X) MC9S12XDT512CAA

To: 68HC12@yahoogroups. com

Received: Wednesday, December 9, 2009, 12:45 PM



what is the cost of it? And now am in coimbatore, Tamil Nadu, India.

--- On Wed, 9/12/09, Anil Redhu wrote:

From: Anil Redhu

Subject: Re: [68HC12] needed programmer for (HCS12X) MC9S12XDT512CAA

To: 68HC12@yahoogroups. com

Date: Wednesday, 9 December, 2009, 10:37 PM



Hi,



I can do for you, whats your contact number. Actually right now I am in
rush, see you later on.



Thanks

Anil Kumar Redhu

416-648-1910

--- On Tue, 12/8/09, mohan kumar wrote:

From: mohan kumar

Subject: [68HC12] needed programmer for (HCS12X) MC9S12XDT512CAA

To: "hcs12" <68HC12@yahoogroups . com>

Received: Tuesday, December 8, 2009, 2:46 PM



hello, so far, i was using PBMCUSLK Project board and SLKS12XDT512.
for learning purposes, now i am developing a accelerometer using
mc9s12xdt512caa microcontroller along with lcd display. for the
above i need seperate programmer for loading my codes into the controller.
can you suggest me a low cost programmer available for the same controller.
Till now i usedP&Emultilink cyclone pro.which is coming along with the
project board (PBMCUSLK).

Regards,Mohan Kumar. R.

New Email names for you!

Get the Email name you've always wanted on the new @ymail and
@rocketmail.

Hurry before someone else does!

http://mail. promotions. yahoo.com/ newdomains/ aa/



____________ _________ _________ _________ _________ _________ _

Looking for the perfect gift? Give the gift of Flickr!

http://www.flickr. com/gift/



New Email names for you!

Get the Email name you've always wanted on the new @ymail and
@rocketmail.

Hurry before someone else does!

http://mail. promotions. yahoo.com/ newdomains/ aa/



____________ _________ _________ _________ _________ _________ _

Looking for the perfect gift? Give the gift of Flickr!

http://www.flickr. com/gift/












New Email names for you!
Get the Email name you've always wanted on the new @ymail and
@rocketmail.
Hurry before someone else does!
http://mail.promotions.yahoo.com/newdomains/aa/