Hi, I have seen a few threads concerning issues in getting the 9s12DP256 to program its own flash memory via serial or CAN and now it's my turn to do this and was wondering if there is any code floating around for this? Thanks, Steve Automated lighting systems at www.brightan.com Embedded micro-controllers and CAN interfaces at www.zanthic.com |
|
flash programming code for 9S12
Started by ●June 30, 2003
Reply by ●July 1, 20032003-07-01
Look at Motorola AN2153 "A Serial Bootloader for Reprogramming the MC9S12DP256 FLASH Memory" for guidelines. I'm interested in reprogramming via CAN too, but development is not started yet. Jordi Costa ----- Original Message ----- From: "Steve Letkeman" <> To: <> Sent: Tuesday, July 01, 2003 12:00 AM Subject: [68HC12] flash programming code for 9S12 > Hi, I have seen a few threads concerning issues in > getting the 9s12DP256 to program its own flash memory > via serial or CAN and now it's my turn to do this and was > wondering if there is any code floating around for this? > > Thanks, > Steve > > Automated lighting systems at www.brightan.com > Embedded micro-controllers and CAN interfaces at www.zanthic.com > |
Reply by ●July 1, 20032003-07-01
Thanks Jordi, I saw the app note and I guess I was hoping somebody might have some C code to share in case it's already out there and I don't have to spend any more time than neccessary! Steve Automated lighting systems at www.brightan.com Embedded micro-controllers and CAN interfaces at www.zanthic.com ----- Original Message ----- From: Jordi Costa To: Sent: Tuesday, July 01, 2003 1:33 AM Subject: Re: [68HC12] flash programming code for 9S12 Look at Motorola AN2153 "A Serial Bootloader for Reprogramming the MC9S12DP256 FLASH Memory" for guidelines. I'm interested in reprogramming via CAN too, but development is not started yet. Jordi Costa ----- Original Message ----- From: "Steve Letkeman" <> To: <> Sent: Tuesday, July 01, 2003 12:00 AM Subject: [68HC12] flash programming code for 9S12 > Hi, I have seen a few threads concerning issues in > getting the 9s12DP256 to program its own flash memory > via serial or CAN and now it's my turn to do this and was > wondering if there is any code floating around for this? > > Thanks, > Steve > > Automated lighting systems at www.brightan.com > Embedded micro-controllers and CAN interfaces at www.zanthic.com > -------------------- ">http://docs.yahoo.com/info/terms/ |