EmbeddedRelated.com
Forums
Memfault State of IoT Report

usb multilink software

Started by samyboy1967 January 1, 2004
hi every body i just bought a usbmultilink programmer and i am
looking for software for hc912 and hc908 thanks for your help




>hi every body i just bought a usbmultilink programmer and i am
>looking for software for hc912 and hc908 thanks for your help

If you are looking for an HC12 debugger, NoICE
(http://www.noicedebugger.com) supports this BDM pod for the HC12 and MCS912.

Support for HC908 may be added in the future.

Best regards, John Hartman

NoICE Debugging Tools
http://www.noicedebugger.com



> hi every body i just bought a usbmultilink programmer and i am
> looking for software for hc912 and hc908 thanks for your help

Hello

The free "Special Edition" of Metrowerks Codewarrior 3 also works well
with the USB Multilink

Best regards
Robert


Metrowerks CodeWarrior supports all USB Multilinks (for HC(S)12 and
HC(S)08).
The free HC12 V3.0 special edition can be downloaded from:
http://www.metrowerks.com/MW/Develop/Embedded/HC12/Downloads

Erich

> -----Original Message-----
> From: samyboy1967 [mailto:]
> Sent: Donnerstag, 1. Januar 2004 21:48
> To:
> Subject: [68HC12] usb multilink software > hi every body i just bought a usbmultilink programmer and i am
> looking for software for hc912 and hc908 thanks for your help > --------------------To
> learn more about Motorola Microcontrollers, please visit
http://www.motorola.com/mcu o learn more about Motorola Microcontrollers,
please visit http://www.motorola.com/mcu ------------------------ Yahoo! Groups Sponsor ---------------------~--> Buy
Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark Printer
at MyInks.com. Free s/h on orders $50 or more to the US & Canada.
http://www.c1tracking.com/l.asp?cidU11
http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/dN_tlB/TM
---------------------------------~-


--- In , "samyboy1967" <samyboy1967@y...> wrote:
> hi every body i just bought a usbmultilink programmer and i am
> looking for software for hc912 and hc908 thanks for your help

Have a look in the files area here, there is a fair amount of bits and pieces and guiding.

If you need something specific call out and you never know:-)

Cheers,

The



Hello The:

P&E also offers a complete line of very reasonably priced software for
both programming and debugging either of these architectures! Check out
http://www.pemicro.com or feel free to e-mail me offlist for more
information.

Regards,
Mark

theobee00 wrote:

>--- In , "samyboy1967" <samyboy1967@y...> wrote: >>hi every body i just bought a usbmultilink programmer and i am
>>looking for software for hc912 and hc908 thanks for your help
>>
>>
>
>Have a look in the files area here, there is a fair amount of bits and pieces and guiding.
>
>If you need something specific call out and you never know:-)
>
>Cheers,
>
>The >--------------------To learn more about Motorola Microcontrollers, please visit
>http://www.motorola.com/mcu
>o learn more about Motorola Microcontrollers, please visit
>http://www.motorola.com/mcu >

--

____________________________
Mark L. Cukier, Design Engineer
P&E Microcomputer Systems
710 Commonwealth Avenue
Boston, MA 02215
_________________________________
e-mail:
phone : (617) 353-9206 x19
fax : (617) 353-9205
_________________________________

visit us on the web at: http: //www.pemicro.com


what i am looking for is a software to read and programme the eeprom on the hc912 and the hc908 microcontrolers

theobee00 <> wrote: --- In , "samyboy1967" <samyboy1967@y...> wrote:
> hi every body i just bought a usbmultilink programmer and i am
> looking for software for hc912 and hc908 thanks for your help

Have a look in the files area here, there is a fair amount of bits and pieces and guiding.

If you need something specific call out and you never know:-)

Cheers,

The
--------------------To learn more about Motorola Microcontrollers, please visit
http://www.motorola.com/mcu
o learn more about Motorola Microcontrollers, please visit
http://www.motorola.com/mcu
---------------------------------
Yahoo! Groups Links

To ---------------------------------



--- In , sam same <samyboy1967@y...> wrote:
> what i am looking for is a software to read and programme the eeprom on the hc912 and the hc908 microcontrolers

The program I wrote to do this is in the files area.

Seems to work OK:-) Cheers, Theo



Memfault State of IoT Report