Hello Folks I have been using CodeWarrior for HC12 development stuff, I would like to move to the gcc toolchain, I did dl the stuff, but getting started in that has been difficult. I would like to find out:- 1.) Is there a suitable IDE to go along with gcc? 2.) How can I flash and debug using this toolchain, the CW had a flasher and built in debugger, whats its equvilant. Is there any pitfalls/traps/tweaks need to be factored for this toolchain? Thanks Jay |
|
HC12 and GCC
Started by ●January 30, 2004
Reply by ●January 30, 20042004-01-30
Jay, See my previous posting. You will likely need to get a commercial BDM. I think you wrote last month that your project is on a very tight schedule. In that case you may want to get also one full-emulator with a trace, so you can quickly resolve the nasty bugs. Hope this helps, Doron Nohau Corporation HC12 In-Circuit Emulators www.nohau.com/emul12pc.html At 06:52 30/01/2004 +0000, you wrote: >Hello Folks > >I have been using CodeWarrior for HC12 development stuff, I would >like to move to the gcc toolchain, I did dl the stuff, but getting >started in that has been difficult. I would like to find out:- > >1.) Is there a suitable IDE to go along with gcc? >2.) How can I flash and debug using this toolchain, the CW had a >flasher and built in debugger, whats its equvilant. > >Is there any pitfalls/traps/tweaks need to be factored for this >toolchain? > >Thanks >Jay |
|
Reply by ●January 30, 20042004-01-30
Indeed! I am yet to talk to managers and get a fat budget for some nice dev tools, for now I am stuck with low cost stuff. I will contact you off the list for some product infos. Thanks Jay --- In , Doron Fael <doronf@n...> wrote: > Jay, > > See my previous posting. > You will likely need to get a commercial BDM. > > I think you wrote last month that your project is on a very tight schedule. > In that case you may want to get also one full-emulator with a trace, so > you can quickly resolve the nasty bugs. > > Hope this helps, > Doron > Nohau Corporation > HC12 In-Circuit Emulators > www.nohau.com/emul12pc.html > > At 06:52 30/01/2004 +0000, you wrote: > >Hello Folks > > > >I have been using CodeWarrior for HC12 development stuff, I would > >like to move to the gcc toolchain, I did dl the stuff, but getting > >started in that has been difficult. I would like to find out:- > > > >1.) Is there a suitable IDE to go along with gcc? > >2.) How can I flash and debug using this toolchain, the CW had a > >flasher and built in debugger, whats its equvilant. > > > >Is there any pitfalls/traps/tweaks need to be factored for this > >toolchain? > > > >Thanks > >Jay > |
|