Forums

Help please...

Started by prav...@gmail.com August 27, 2009
I'm a newbie in the field of embedded systems, For my project, I have to build an Image processing application using Embedded systems.... I have with me a at91sam9263 board ... I have also downloaded the yagarto gnu gcc arm cross compiler and the yagarto tools... Is there any way to integrate opencv & yagarto with eclipse....??? And, is there any at91sam9263 simulator....???
Pravin,

Try the Keil IDE for ARM microcontrollers, its a nice development environment where you can choose to either simulate or debug your program on the board. Eclipse is very limited when it comes to simulation.

By the way are you located in India, if yes where? How did you manage to get a board, I am looking for one too.

Arif
________________________________
From: "p...@gmail.com"
To: A...
Sent: Thursday, August 27, 2009 11:40:23 AM
Subject: [AT91SAM] Help please...

I'm a newbie in the field of embedded systems, For my project, I have to build an Image processing application using Embedded systems.... I have with me a at91sam9263 board ... I have also downloaded the yagarto gnu gcc arm cross compiler and the yagarto tools... Is there any way to integrate opencv & yagarto with eclipse....? ?? And, is there any at91sam9263 simulator... .???
Hi Arif,
Thanks for your reply, I'll check out keil and will get back to
you..... Btw, I got my at91sam9263 board from a company called Innovate
solutions in bangalore (http://www.innovatesolutions.net/) ...

Regards,
---------
Praveen Krishnakumar
Department of Mathematics and Computer Science,
Sri Sathya Sai University,
Prashanthinilayam,
INDIA.
On Thu, Aug 27, 2009 at 11:40 PM, Arif Mansoori wrote:

> Pravin,
>
> Try the Keil IDE for ARM microcontrollers, its a nice development
> environment where you can choose to either simulate or debug your program on
> the board. Eclipse is very limited when it comes to simulation.
>
> By the way are you located in India, if yes where? How did you manage to
> get a board, I am looking for one too.
>
> Arif
>
> ------------------------------
> *From:* "p...@gmail.com"
> *To:* A...
> *Sent:* Thursday, August 27, 2009 11:40:23 AM
> *Subject:* [AT91SAM] Help please...
>
> I'm a newbie in the field of embedded systems, For my project, I have to
> build an Image processing application using Embedded systems.... I have with
> me a at91sam9263 board ... I have also downloaded the yagarto gnu gcc arm
> cross compiler and the yagarto tools... Is there any way to integrate opencv
> & yagarto with eclipse....? ?? And, is there any at91sam9263 simulator...
> .???
>
> start: 0000-00-00 end: 0000-00-00
Hey Arif,
Can you give me some links from where I can download the
full version of Keil IDE for ARM microcontrollers ..... I'm not able to get
one....

Regards,
---------
Praveen Krishnakumar
Department of Mathematics and Computer Science,
Sri Sathya Sai University,
Prashanthinilayam,
INDIA.
On Sat, Aug 29, 2009 at 10:51 AM, Praveen K wrote:

> Hi Arif,
> Thanks for your reply, I'll check out keil and will get back to
> you..... Btw, I got my at91sam9263 board from a company called Innovate
> solutions in bangalore (http://www.innovatesolutions.net/) ...
>
> Regards,
> ---------
> Praveen Krishnakumar
> Department of Mathematics and Computer Science,
> Sri Sathya Sai University,
> Prashanthinilayam,
> INDIA.
>
> On Thu, Aug 27, 2009 at 11:40 PM, Arif Mansoori wrote:
>
>> Pravin,
>>
>> Try the Keil IDE for ARM microcontrollers, its a nice development
>> environment where you can choose to either simulate or debug your program on
>> the board. Eclipse is very limited when it comes to simulation.
>>
>> By the way are you located in India, if yes where? How did you manage to
>> get a board, I am looking for one too.
>>
>> Arif
>>
>> ------------------------------
>> *From:* "p...@gmail.com"
>> *To:* A...
>> *Sent:* Thursday, August 27, 2009 11:40:23 AM
>> *Subject:* [AT91SAM] Help please...
>>
>> I'm a newbie in the field of embedded systems, For my project, I have to
>> build an Image processing application using Embedded systems.... I have with
>> me a at91sam9263 board ... I have also downloaded the yagarto gnu gcc arm
>> cross compiler and the yagarto tools... Is there any way to integrate opencv
>> & yagarto with eclipse....? ?? And, is there any at91sam9263 simulator...
>> .???
>>
>> start: 0000-00-00 end: 0000-00-00
>
> Hey Arif,
> Can you give me some links from where I can download
> the full version of Keil IDE for ARM microcontrollers ..... I'm not
> able to get one....

https://www.keil.com/product/prices.asp :o)

Regards,
Richard.

+ http://www.FreeRTOS.org
Designed for Microcontrollers. More than 7000 downloads per month.

+ http://www.SafeRTOS.com
Certified by T as meeting the requirements for safety related systems.

Here it is https://www.keil.com/demo/eval/arm.htm
________________________________
From: Praveen K
To: A...
Sent: Saturday, August 29, 2009 11:33:43 AM
Subject: Re: [AT91SAM] Help please...

Hey Arif,
Can you give me some links from where I can download the full version of Keil IDE for ARM microcontrollers ..... I'm not able to get one....

Regards,
------------ --------- --------- --------- ------
Praveen Krishnakumar
Department of Mathematics and Computer Science,
Sri Sathya Sai University,
Prashanthinilayam,
INDIA.

On Sat, Aug 29, 2009 at 10:51 AM, Praveen K wrote:

>
>Hi Arif,
> Thanks for your reply, I'll check out keil and will get back to you..... Btw, I got my at91sam9263 board from a company called Innovate solutions in bangalore (http://www.innovate solutions. net/) ...
>
>Regards,
>------------ --------- --------- --------- ------
>Praveen Krishnakumar
>Department of Mathematics and Computer Science,
>Sri Sathya Sai University,
>Prashanthinilayam,
>INDIA.
>On Thu, Aug 27, 2009 at 11:40 PM, Arif Mansoori wrote:
>
> >>
>>Pravin,
>>
>>Try the Keil IDE for ARM microcontrollers, its a nice development environment where you can choose to either simulate or debug your program on the board. Eclipse is very limited when it comes to simulation.
>>
>>By the way are you located in India, if yes where? How did you manage to get a board, I am looking for one too.
>>
>>Arif
________________________________
From: "pravinkenator@ gmail.com"
>>To: AT91SAM@yahoogroups .com
>>Sent: Thursday, August 27, 2009 11:40:23 AM
>>Subject: [AT91SAM] Help please...
>> >>
>>I'm a newbie in the field of embedded systems, For my project, I have to build an Image processing application using Embedded systems.... I have with me a at91sam9263 board ... I have also downloaded the yagarto gnu gcc arm cross compiler and the yagarto tools... Is there any way to integrate opencv & yagarto with eclipse....? ?? And, is there any at91sam9263 simulator... .???
>>
>>>>
>>start: 0000-00-00
>>end: 0000-00-00
>>
>
Here it is https://www.keil.com/demo/eval/arm.htm
________________________________
From: FreeRTOS Info
To: A...
Sent: Saturday, August 29, 2009 11:39:15 AM
Subject: RE: [AT91SAM] Help please...

>
> Hey Arif,
> Can you give me some links from where I can download
> the full version of Keil IDE for ARM microcontrollers ..... I'm not
> able to get one....

https://www. keil.com/ product/prices. asp :o)

Regards,
Richard.

+ http://www.FreeRTOS.org
Designed for Microcontrollers. More than 7000 downloads per month.

+ http://www.SafeRTOS.com
Certified by T as meeting the requirements for safety related systems.
Hi Praveen!

Where did u got the AT91SAM9263 board in India. Iam looking for AT91SAM926x board. Pls give me the details of the vendor.

With regards,
Bh.Subrahmanyam.

--- On Sat, 29/8/09, Praveen K wrote:

From: Praveen K
Subject: Re: [AT91SAM] Help please...
To: A...
Date: Saturday, 29 August, 2009, 3:03 PM


Hey Arif,
Can you give me some links from where I can download the full version of Keil IDE for ARM microcontrollers ..... I'm not able to get one....

Regards,
------------ --------- --------- --------- ------
Praveen Krishnakumar
Department of Mathematics and Computer Science,
Sri Sathya Sai University,
Prashanthinilayam,
INDIA.

On Sat, Aug 29, 2009 at 10:51 AM, Praveen K wrote:
Hi Arif,
Thanks for your reply, I'll check out keil and will get back to you..... Btw, I got my at91sam9263 board from a company called Innovate solutions in bangalore (http://www.innovate solutions. net/) ...
Regards,
------------ --------- --------- --------- ------
Praveen Krishnakumar
Department of Mathematics and Computer Science,
Sri Sathya Sai University,
Prashanthinilayam,
INDIA.

On Thu, Aug 27, 2009 at 11:40 PM, Arif Mansoori wrote:


Pravin,

Try the Keil IDE for ARM microcontrollers, its a nice development environment where you can choose to either simulate or debug your program on the board. Eclipse is very limited when it comes to simulation.
By the way are you located in India, if yes where? How did you manage to get a board, I am looking for one too.

Arif
From: "pravinkenator@ gmail.com"

To:
AT91SAM@yahoogroups .com
Sent: Thursday, August 27, 2009 11:40:23 AM
Subject: [AT91SAM] Help please...


I'm a newbie in the field of embedded systems, For my project, I have to build an Image processing application using Embedded systems.... I have with me a at91sam9263 board ... I have also downloaded the yagarto gnu gcc arm cross compiler and the yagarto tools... Is there any way to integrate opencv & yagarto with eclipse....? ?? And, is there any at91sam9263 simulator... .???

start: 0000-00-00
end: 0000-00-00
Love Cricket? Check out live scores, photos, video highlights and more. Click here http://cricket.yahoo.com
Dear All;

I'm having trouble throuhgprogramming my chip. My chip is AT91SAM9260, Olimex Board.I cannot access the NandFlash using ISP 1.13. So whenever I want to program the chip, first I have to write into the SRAM then the Nandflash, but unfortunately my program is cleared when restarted!

your help is much appreciated

Regards;
A. Gh.
Hi,

On Sun, 2009-08-30 at 05:22 -0700, Ali Ghadirzadeh wrote:
> Dear All;
>
> I'm having trouble throuhg programming my chip. My chip is
> AT91SAM9260, Olimex Board.I cannot access the NandFlash using ISP
> 1.13. So whenever I want to program the chip, first I have to write
> into the SRAM then the Nandflash, but unfortunately my program is
> cleared when restarted!
>
> your help is much appreciated
>
> Regards;
> A. Gh.
> Your email settings: Individual Email|Traditional
> Change settings via the Web (Yahoo! ID required)
> Change settings via email: Switch delivery to Daily Digest | Switch to
> Fully Featured
> Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
>

Just to make sure, is jumper NANDF_E closed ?
Also, if you use ISP SW itself, you first have to run the "enable"
script for DataFlash or NandFlash.
You can do this from TCL - but in your case, make sure you first click
the button "enable Nand Flash" in Atmel ISP SW.

Does the board still boot Linux properly as when you initially got it
from Olimex ? If it does/did then the CS is selected for Nand Flash
because that's where the rootfs is...

HTH

--
Best regards,
Kris