EmbeddedRelated.com
Forums

[AVR club] want to hire a programmer for a small arduino program,

Started by shubham tiwari VU3SXN December 22, 2013
Hi,

want to hire a programmer for a small micro controller program, i prefer
arduino but any other micro controller will also work,

kindly contact me if any one is interested

email

v...@gmail.com

thanks
If you have  found one, i need him too..

Gesendet über Yahoo Mail für Android
Hi, our team is ready to develop any simple or complex analog/digital hardware, firmware or software.
Regards
Abolfazl Rostamzadeh
a...@yahoo.com
Same here.
On Mon, Dec 23, 2013 at 4:42 AM, Seifenfisch wrote:

> If you have found one, i need him too..
>
> Gesendet er Yahoo Mail f Android
>
> ------------------------------
> * From: * shubham tiwari VU3SXN ;
> * To: * ;
> * Subject: * [AVR club] want to hire a programmer for a small arduino
> program,
> * Sent: * Sun, Dec 22, 2013 11:31:06 AM
>
> Hi,
>
> want to hire a programmer for a small micro controller program, i prefer
> arduino but any other micro controller will also work,
>
> kindly contact me if any one is interested
>
> email
>
> v...@gmail.com
>
> thanks
>
>
>

--
Matthew Metzger
Cognimotion, LLC
614.301.0619
m...@gmail.com
www.cognimotion.com
so in simple words:

I am the owner of patent EP2028099
and I need a smal controler to run my test equipment.
first 2 simple standart non sensored brusless rc motors need to be controled as a demonstrator. thats all.

On Monday, 23 December 2013, 10:42, Seifenfisch wrote:

 
If you have found one, i need him too..
Gesendet über Yahoo Mail für Android

________________________________
From: shubham tiwari VU3SXN ;
To: ;
Subject: [AVR club] want to hire a programmer for a small arduino program,
Sent: Sun, Dec 22, 2013 11:31:06 AM
 
Hi,
want to hire a programmer for a small micro controller program, i prefer arduino but any other micro controller will also work,
kindly contact me if any one is interested
 
email
v...@gmail.com
 
thanks
 
Kindly,  you will receive the procedure at your email, soon.
Hello

I have experience with many micros in C in . Atmel AVR is preferred as I have doe 10+ project with this family.

We are just now shutting down for our Annual Holidays but would be happy to discuss your requirements.

Happy Holidays

Ivan Vernot

www.realtimedesigns.com.au

From: a... [mailto:a...] On Behalf Of Seifenfisch
Sent: Monday, 23 December 2013 8:43 PM
To: a...
Subject: AW: [AVR club] want to hire a programmer for a small arduino program,

If you have found one, i need him too..

Gesendet über Yahoo Mail für Android

_____

From: shubham tiwari VU3SXN >;
To: >;
Subject: [AVR club] want to hire a programmer for a small arduino program,
Sent: Sun, Dec 22, 2013 11:31:06 AM

Hi,

want to hire a programmer for a small micro controller program, i prefer arduino but any other micro controller will also work,

kindly contact me if any one is interested

email

v...@gmail.com

thanks
Are you a student? If yes, I can guide you for developing your project yourself .
You must know that atmel mcu can generate PWM with duty cycle from 0/255 to 255/255.
The maximum PWM frequency is   XTAL/256 or XTAL/510 (non corrected / corrected phase) for 8 bit PWM.  Resolution can take any value from  2 to 1024 (1 to 10 bits)
XTAL is up to 16MHz (or 20MHz)
The MCU ADC is 10 bits (0 to 1023) , it can measure form 0.0 to 102.3 V, and from 0 to 1023 mA . with scaling you can change the range.
If you have CodeVisionAvr c compiler , it help you to generate automatically  the code needed for pwm, lcd and adc setup with libraries to use them
Habitually, I develop my circuits and my programs for my application
 Show message history

On Monday, December 23, 2013 10:36 AM, Abolfazl Rostamzadeh wrote:

 
Kindly, you will receive the procedure at your email, soon.

________________________________
From: Seifenfisch ;
To: a... ;
Subject: Re: AW: [AVR club] want to hire a programmer for a small arduino program,
Sent: Mon, Dec 23, 2013 4:08:53 PM
 
so in simple words:

I am the owner of patent EP2028099
and I need a smal controler to run my test equipment.
first 2 simple standart non sensored brusless rc motors need to be controled as a demonstrator. thats all.

On Monday, 23 December 2013, 10:42, Seifenfisch wrote:

 
If you have found one, i need him too..
Gesendet über Yahoo Mail für Android

________________________________
From: shubham tiwari VU3SXN ;
To: ;
Subject: [AVR club] want to hire a programmer for a small arduino program,
Sent: Sun, Dec 22, 2013 11:31:06 AM
 
Hi,
want to hire a programmer for a small micro controller program, i prefer arduino but any other micro controller will also work,
kindly contact me if any one is interested
 
email
v...@gmail.com
 
thanks