I am doing a project where I need an interface between mobile phone and microcontroller. Actually I need to process text message on microcontroller. The mobile phone has USB output, and I found that PIC18F4550 has USB input, but both of the device acts as slave not as host. I also found that some mobile phones like Nokia 6610, Nokia 6610i and, Nokia 6210 have serial port which I can interface with microcontroller like 8051 etc, but I am not planning to use them, so I am looking for microcontroller to work as a USB host to get text sms from mobile phones and process them. Is there any way to solve my problem ? Thank you for your help! Regards, Ram --------------------------------------- This message was sent using the comp.arch.embedded web interface on http://www.EmbeddedRelated.com
How to Interface microcontroller with Mobile using USB
Started by ●October 28, 2009
Reply by ●October 28, 20092009-10-28
rememberramu wrote:> I am doing a project where I need an interface between mobile phone and > microcontroller. Actually I need to process text message on > microcontroller. The mobile phone has USB output, and I found that > PIC18F4550 has USB input, but both of the device acts as slave not as host. > I also found that some mobile phones like Nokia 6610, Nokia 6610i and, > Nokia 6210 have serial port which I can interface with microcontroller > like 8051 etc, but I am not planning to use them, so I am looking for > microcontroller to work as a USB host to get text sms from mobile phones > and process them. Is there any way to solve my problem ? > > Thank you for your help! > > Regards, RamThe Atmel AVR USB1287 has USB-on-the-go which means that it can work as host and device (not at the same time off course). You can buy it on a little board called the USB Key which is very handy and not expensive. Good luck with Your project! Sincerely, Rene
Reply by ●October 29, 20092009-10-29
>rememberramu wrote: >> I am doing a project where I need an interface between mobile phone and >> microcontroller. Actually I need to process text message on >> microcontroller. The mobile phone has USB output, and I found that >> PIC18F4550 has USB input, but both of the device acts as slave not ashost.>> I also found that some mobile phones like Nokia 6610, Nokia 6610i and, >> Nokia 6210 have serial port which I can interface with microcontroller >> like 8051 etc, but I am not planning to use them, so I am looking for >> microcontroller to work as a USB host to get text sms from mobilephones>> and process them. Is there any way to solve my problem ? >> >> Thank you for your help! >> >> Regards, Ram > >The Atmel AVR USB1287 has USB-on-the-go which means that it can work as >host and device (not at the same time off course). You can buy it on a >little board called the USB Key which is very handy and not expensive. > >Good luck with Your project! >Sincerely, >Rene >I found that PIC24F series can also do that, have you ever used it ? What is your experience ? --------------------------------------- This message was sent using the comp.arch.embedded web interface on http://www.EmbeddedRelated.com
Reply by ●October 29, 20092009-10-29
On Oct 28, 11:01=A0am, "rememberramu" <rememberr...@gmail.com> wrote:> I am doing a project where I need an interface between mobile phone and > microcontroller. Actually I need to process text message on > microcontroller. The mobile phone has USB output, and I found that > PIC18F4550 has USB input, but both of the device acts as slave not as hos=t.> I also found that some mobile phones like Nokia 6610, Nokia 6610i and, > Nokia 6210 =A0have serial port which I can interface with microcontroller > like 8051 etc, but I am not planning to use them, so I am looking for > microcontroller to work as a USB host to get text sms from mobile phones > and process them. Is there any way to solve my problem ? > > Thank you for your help! > > Regards, Ram > > --------------------------------------- =A0 =A0 =A0 =A0 > This message was sent using the comp.arch.embedded web interface onhttp:/=/www.EmbeddedRelated.com Get a GSM module USB Host is hard to get done correctly and expensive, and as far as i know there is no standard on USB interface from mobile phones.
Reply by ●November 1, 20092009-11-01
rememberramu wrote:>> The Atmel AVR USB1287 has USB-on-the-go which means that it can work as >> host and device (not at the same time off course). You can buy it on a >> little board called the USB Key which is very handy and not expensive. > > I found that PIC24F series can also do that, have you ever used it ? > What is your experience ?I am sorry, I have no experience with PIC's. Good luck! Rene
