ICD2 Driver

 I am Ezekiel. I, and I am trying to download a program into the chip (
microchip pic18f4550) with window7 but could not be able to do it. One of
the major problems, was that the system will be demanding for ICD2 USB
driver in order to successfully carrid out.

 My question is 

Do anyone know how to downlaod an ICD2 USB Driver for window7 or Do anyone
know the site i will visit to be able to download this driver for ICD2?
 Thanks
 From West Ezeiel 

	   
					
---------------------------------------		
Posted through http://www.EmbeddedRelated.com

> I am Ezekiel. I, and I am trying to download a program into the chip (
>microchip pic18f4550) with window7 but could not be able to do it. One of
>the major problems, was that the system will be demanding for ICD2 USB
>driver in order to successfully carrid out.
>
> My question is 
>
>Do anyone know how to downlaod an ICD2 USB Driver for window7 or Do
anyone
>know the site i will visit to be able to download this driver for ICD2?
> Thanks
> From West Ezekiel 
>
>	   
>					
>---------------------------------------		
>Posted through http://www.EmbeddedRelated.com
>	   
					
---------------------------------------		
Posted through http://www.EmbeddedRelated.com

On Sun, 08 Aug 2010 09:43:31 -0500, "Ezekiel west"
<eisichei2002@n_o_s_p_a_m.yahoo.com> wrote:

> I am Ezekiel. I, and I am trying to download a program into the chip (
>microchip pic18f4550) with window7 but could not be able to do it. One of
>the major problems, was that the system will be demanding for ICD2 USB
>driver in order to successfully carrid out.
>
> My question is 
>
>Do anyone know how to downlaod an ICD2 USB Driver for window7 or Do anyone
>know the site i will visit to be able to download this driver for ICD2?

Are the drivers not part of MPLAB?

-- 
Rich Webb     Norfolk, VA

Actually, I am having this problem as well. I am using Windows 7 (32-bit). My ICD2 is, unfortunately, P/N 10-00319. My problem is that the Microchip WinUSB Device driver installed just fine, but the Microchip ICD2 Firmware Client did not. There is this note:

"If your debug unit is numbered P/N 10-00319, you may have to repeat this procedure for the �Microchip MPLAB ICD 2 Firmware Loader�.

However Windows seems to think everything is OK and refuses to install the Firmware Loader. Any hints/tips?