> Hi again, one additional doubt. Did you connect USB_UP_LED and VBUS pins? > Let me see if i understand correctly, USB_UP_LED is just used for signaling > purpuses so is not really crytical. And VBUS is just used for devicemode to > scheck when it gets connected sensing VBUS right? So no need at host mode.I did attach USB_UP_LED to a LED. The LED is turned on when the USB host is enabled, but you might as well leave it or, or use the pin as a GPIO and control a LED yourself. I left the VBUS pin unconnected.
Doubts about LPC1758 USB Host usage
Started by ●February 2, 2012
Reply by ●February 6, 20122012-02-06