Hello, I built bootloader for NXP LPC2468FBD208. Following files were generated: NXP2468_BootLoader.axf NXP2468_BootLoader.hex I'm using Keil tools. I have ULINK2 debugger connected from PC(USB) to target board. Which above file do I load in the target using the debugger? How do I know where in memory will bootloader reside? How do I load the bootloader into the target? Thank you! --------------------------------------- Posted through http://www.EmbeddedRelated.com

How to load bootloader(using debugger) in ARM7 based target?
Started by ●June 3, 2013
Reply by ●June 3, 20132013-06-03
>Hello, I built bootloader for NXP LPC2468FBD208. Following files were >generated: > >NXP2468_BootLoader.axf >NXP2468_BootLoader.hex > >I'm using Keil tools. I have ULINK2 debugger connected from PC(USB) to >target board. > >Which above file do I load in the target using the debugger? How do Iknow>where in memory >will bootloader reside? How do I load the bootloader into the target? > >Thank you! > > >--------------------------------------- >Posted through http://www.EmbeddedRelated.com >I'm using micro visison4 to download flash program/erase algorithm totarget RAM. From micro vision4 main menu, I select Flash - Download but I get following error: ULINK - ARM Error No ULINK Device found My target is seems to be powered up because power supply connected to my target is drawing 0.17 amps. The USB LED in ULINK2 device is lit red. The COM and RUN LEDs are not lit. Please advise! --------------------------------------- Posted through http://www.EmbeddedRelated.com
Reply by ●June 3, 20132013-06-03
>>Hello, I built bootloader for NXP LPC2468FBD208. Following files were >>generated: >> >>NXP2468_BootLoader.axf >>NXP2468_BootLoader.hex >> >>I'm using Keil tools. I have ULINK2 debugger connected from PC(USB) to >>target board. >> >>Which above file do I load in the target using the debugger? How do I >know >>where in memory >>will bootloader reside? How do I load the bootloader into the target? >> >>Thank you! >> >> >>--------------------------------------- >>Posted through http://www.EmbeddedRelated.com >>I'm using micro visison4 to download flash program/erase algorithm to >target RAM. From micro vision4 main menu, I select Flash - Download butI>get following error: ULINK - ARM Error No ULINK Device found > >My target is seems to be powered up because power supply connected to my >target is drawing 0.17 amps. The USB LED in ULINK2 device is lit red.The>COM and RUN LEDs are not lit. > >Please advise! > >--------------------------------------- >Posted through http://www.EmbeddedRelated.com >Never mind! my colleague was able to help me out.--------------------------------------- Posted through http://www.EmbeddedRelated.com
