ARM Cortex dev kit with 3 axis Gyro + 3 axis accelerometer ?

On 01/08/13 12:47, Paul Rubin wrote:
> It looks like the F3 board has the gyroscope and mag sensor, but the F4
> has nicer audio stuff.

That's why I got the F3, but the F4 has USB OTG which the F3 lacks.
F4 also has a USB CDC (Virtual COM port or VCP) example too, which
the F3 lacks; I'm in the process of building one. Shouldn't be too
hard, starting from the HID Joystick example that ST provides.

I bought it to control a digital radio chip in a hand-held direction
finding sniffer (for which the IMU will know the direction) but I
might wind up adding an RF stage, VFO, mixer and downconvert to 50KHz
to do the rest as an SDR in the F3... maybe.

Clifford Heath.

On Sun, 28 Jul 2013 17:15:27 -0700 (PDT), Boo
<mikedavies621@yahoo.com> wrote:

>Hi,
>
>I'm looking for a cheap dev kit with an ARM Cortex CPU and both a 3-axis gyro and a 3-axis accelerometer.  Anyone know of such a board ?  I really don't need much else apart from the ability to drive 3 PWM channels as outputs. Project is a stabilised camera platform for use on a boat.
>

If you can wait a bit, then this board might be suitable.
(Apparently will be available in January) 

http://paparazzi.enac.fr/wiki/Lisa/S

Regards
  Anton Erasmus

Anton Erasmus <nobody@spam.prevent.net> wrote:
> On Sun, 28 Jul 2013 17:15:27 -0700 (PDT), Boo
> <mikedavies621@yahoo.com> wrote:

> >Hi,
> >
> >I'm looking for a cheap dev kit with an ARM Cortex CPU and both a 3-axis
> >gyro and a 3-axis accelerometer.  Anyone know of such a board ?  I really
> >don't need much else apart from the ability to drive 3 PWM channels as
> >outputs. Project is a stabilised camera platform for use on a boat. 
> >

> If you can wait a bit, then this board might be suitable.
> (Apparently will be available in January) 

> http://paparazzi.enac.fr/wiki/Lisa/S

What is wrong with the STM32F3 Discovery? It has gyros, acceleroter and
magnetometer... 

-- 
Uwe Bonnes                bon@elektron.ikp.physik.tu-darmstadt.de

Institut fuer Kernphysik  Schlossgartenstrasse 9  64289 Darmstadt
--------- Tel. 06151 162516 -------- Fax. 06151 164321 ----------