Hi I ask your help for a problem relative to my PC and its OS,but inherent to embedded electronics,because the problem affects just the debug operations After a registry clean ,maybe done too deeply,my XP pro works fine except during debug: i have the same strange behaviour with two different IDE's, CodeWarrior for MCU 10.5 and LPCXpresso,r. 5.xx,6.xx Despite the USB emulator Debugger is correctly listed in Control Panel ,launching the debug it happens that the progress bar stucks at 61%,and it runs in this state endlessly. In both case i have the same behaviour,no difference plugging in the demo boards or not Any idea? Thank you for your time Diego
XP problem..only during debug! on CW10.5 and LPCXpresso??
Started by ●April 27, 2014
Reply by ●April 28, 20142014-04-28
On Sun, 27 Apr 2014 10:58:08 +0200, blisca wrote:> Hi I ask your help for a problem relative to my PC and its OS,but > inherent to embedded electronics,because the problem affects just the > debug operations > > After a registry clean ,maybe done too deeply,my XP pro works fine > except during debug: > i have the same strange behaviour with two different IDE's, CodeWarrior > for MCU 10.5 and LPCXpresso,r. 5.xx,6.xx Despite the USB emulator > Debugger is correctly listed in Control Panel ,launching the debug it > happens that the progress bar stucks at 61%,and it runs in this state > endlessly. > In both case i have the same behaviour,no difference plugging in the > demo boards or not > > Any idea? > > Thank you for your time > > DiegoThe first thing I'd do (well, second after some cursing) would be to uninstall the IDE's and related software then reinstall it. That should either fix up the registry or mangle it so badly that you have an excuse to start over with a clean install of the OS. -- Tim Wescott Wescott Design Services http://www.wescottdesign.com