microcontroller search

Hello All,
               Iam looking to buy a microcontroller board which has a 4.3"
LCD, ethernet, USB, ADC controller within the uC and pin out for use and
GPIOs. 
Any suggestions ?

Thanks,
Srinivas


	   
					
---------------------------------------		
Posted through http://www.EmbeddedRelated.com

"srinib"  wrote in message 
news:Hp6dnYT77s9hmOjOnZ2dnUVZ_hOdnZ2d@giganews.com...

Hello All,
               Iam looking to buy a microcontroller board which has a 4.3"
LCD, ethernet, USB, ADC controller within the uC and pin out for use and
GPIOs.
Any suggestions ?

Thanks,
Srinivas




--------------------------------------- 
Posted through http://www.EmbeddedRelated.com


Hi,

look at olimex, I think you can find something like STK2478....

Regards Jens 

On 15/05/14 20.22, srinib wrote:
> Hello All,
>                 Iam looking to buy a microcontroller board which has a 4.3"
> LCD, ethernet, USB, ADC controller within the uC and pin out for use and
> GPIOs.
> Any suggestions ?
>
> Thanks,
> Srinivas
>
>
> 	
> 					
> ---------------------------------------		
> Posted through http://www.EmbeddedRelated.com

Hi Srinivas

Look at these - cheap and high quality - download schematics after 
receiving the boards:

E.g.:
LPC1788-32 Developer's Kit:
http://www.embeddedartists.com/products/kits/lpc1788_kit.php
LCD Board, 4.3 inch TFT 480x272:
http://www.embeddedartists.com/products/displays/lcdb_43.php

main page:
http://www.embeddedartists.com/

-

http://www.embeddedartists.com/products/lpcxpresso/lpc1769_xpr.php
"Motherboard", Base board:
http://www.embeddedartists.com/products/lpcxpresso/xpr_base.php

Glenn

On Thursday, May 15, 2014 2:22:52 PM UTC-4, srinib wrote:
> Hello All,
> 
>                Iam looking to buy a microcontroller board which has a 4.3"
> 
> LCD, ethernet, USB, ADC controller within the uC and pin out for use and
> 
> GPIOs. 
> 
> Any suggestions ?
> 
> 
> 
> Thanks,
> 
> Srinivas
> 
> 
> 
> 
> 
> 	   
> 
> 					
> 
> ---------------------------------------		
> 
> Posted through http://www.EmbeddedRelated.com

Hello,
It depends on what you want from the board. Reading the forums, I have in 
general seen a lot of frustration by people trying to get high speed GPIO or 
various IO modes out of SBC's. 
The doc doe the ARM335x have many errors, and attempts to get easy results with 
code are difficult. The point is: If you are sailing into uncharted waters
(ie no one has done it before and talked about it), your journey may be long.

I remain optimistic, but cautious. jb

On Thursday, May 15, 2014 1:22:52 PM UTC-5, srinib wrote:
> Hello All,
> 
>                Iam looking to buy a microcontroller board which has a 4.3"
> 
> LCD, ethernet, USB, ADC controller within the uC and pin out for use and
> 
> GPIOs. 
> 
> Any suggestions ?
> 
> 
> 
> Thanks,
> 
> Srinivas
> 
> 
> 
> 
> 
> 	   
> 
> 					
> 
> ---------------------------------------		
> 
> Posted through http://www.EmbeddedRelated.com


Are looking for a turn-key item? WinSystems  they may have something for you. Or a product there may offer an idea how to proceed on your own.