EmbeddedRelated.com
Forums
The 2024 Embedded Online Conference

i am new to pc104 --- Help

Started by adi February 18, 2004
is there any one who manufacture pc104 with pentium 4 and firewire , Pci slot.
if so can you refer me to his web page? or correct me if i am wrong.

thanks alot

anahmany
adi wrote:
> > is there any one who manufacture pc104 with pentium 4 and firewire , Pci slot. > if so can you refer me to his web page? or correct me if i am wrong. > > thanks alot
I don't know if there are PC/104 board running P4 chips. P4s use a lot of power and get very hot. They are normally run with heat sinks larger than a PC104 board. But a search on google should let you know if any are around. When you ask about a PCI slot, I'm not sure what you mean. PC104 boards can have a PCI interface, but PC104 is a stack through formfactor meaning the boards sit one on top of the other with a connector that has pins on one side of the board and a socket on the other. This is called a PC104+ board. There is also a new version that has eliminated the PC104 connector and is called PCI104, so it only has the PCI connector. -- Rick "rickman" Collins rick.collins@XYarius.com Ignore the reply address. To email me use the above address with the XY removed. Arius - A Signal Processing Solutions Company Specializing in DSP and FPGA design URL http://www.arius.com 4 King Ave 301-682-7772 Voice Frederick, MD 21701-3110 301-682-7666 FAX
adi wrote:

> is there any one who manufacture pc104 with pentium 4 and firewire , Pci slot. > if so can you refer me to his web page? or correct me if i am wrong. > > thanks alot > > anahmany
check out www.megatel.ca (Canada)

The 2024 Embedded Online Conference