Re: CodeWright Error

responding to
http://www.electrondepot.com/embedded/codewright-error-124860-.htm , Nick
wrote:

Hi Rick
Since your last e-mail, here was some more coments and opinion

As today is Wednesday, I was want to remeber your by CW software.

Please let me know if your help is still available and how I go get it.

Tahnk you again all
Regards
Nick

> gnuarm  wrote:
>
> On 10/1/2015 9:37 PM, Nick wrote: 
> > responding to 
> > http://www.electrondepot.com/embedded/codewright-error-124860-.htm
> , Nick 
> > wrote: 
> >> david.brown  wrote: 
> >> 
> >> 
> >> > > Hi. I have searched over the internet about
> Codewright 5.1 and i 
> >> found > on this > forum some old topics. I need to buy
> Codewright 5.1 
> >> and i see this 
> >> is > not valid anymore because is an > very old. > Can
> anyone help me 
> >> PLEASE with a demo evaluation copy ?! > Thank you so much
> > Nick > > 
> >> I have to ask - /why/ are you desperate to get hold of an
> outdated 
> >> version of an outdated editor?  There was a time when CodeWrite
> was a 
> >> top-range programmer's editor, and worth paying for - but these
> days 
> >> there is a wide range of free editors, many with far more
> features 
> >> than CodeWrite ever had (and others that are lighter and faster
> - not 
> >> everyone wants a big and powerful editor).  I can understand
> that 
> >> someone who has been using CodeWrite for years would want to
> keep 
> >> using it, but I cannot see why anyone would want it now. 
> >> I have a manual for CodeWrite 5 on my shelf, from 1997.  It
> sits 
> >> beside some LANtastic for DOS guides, right next to an 8"
> floppy disk. 
> >> 
> > 
> > 
> > Hi all 
> > Thank you so much for your fast answer. 
> > I need this OLD version (v5.1) because i need to reprogram some OLD
> building 
> > management panels and i have support and manuals only for this
> version of 
> > codewright. 
> > As i am not an experimented developer i will have to follow
> instruction from 
> > this manual to with this version. 
> > If i will get another compiler, i will be probably COMPLETELY LOST.
> I am 
> > anyway scared about this Codewright 5.1 
> > I was searched few days (one, tow hours each day) to find this
> version but it 
> > is completely dispaerd. I tried as well on eBay and Amazon. 
> > I found anyway, Codewright v7.5 but i understand this have some bit
> difference. 
> > The problem is i have no space for mistakes because this system
> that i have to 
> > reprogram, is functional, in a bulding and if i make something
> wrong, system 
> > will not work any more. 
> > Beside of the, programming of this must be made with Microsoft
> Macro Assembler 
> > MASM v6.1, then compiled with Codewrite and finale, loaded in the
> master panel 
> > via dedicated Winsweep serial communication software. 
> > 
> > Anyway, if is not a big deal for you, please help me with manual of
> this 5.1 
> > version, because, i did;t found manual over internet. 
> > Anyway, i am an very ambitios guy and i will not stop searching
> until i will 
> > not find a copy 
> > 
> > Thank you so much for all time spent with my problem 
> 
> When you reply, but sure you don't leave the "-- " on the line
> before  
> your new writing.  That flags it as a signature and makes it hard to
> read. 
> 
> If your development method is so constrained that you can't use a  
> different editor, you may be in trouble.  If you are not in a big hurry 
> 
> I will check my office when I get back next week and see if I have an  
> old 5.1 CD around.  I know I had a couple of versions and that may be  
> one of them. 
> 
> I'm a little uncomfortable with the legality of this though.  They are  
> still selling Codewright, I think mainly to the mainframe code  
> development market where it was a very popular tool along with PVCS and 
> 
> some other packages.  The price is up there, over $300 I think.  But  
> shoot me an email Wednesday and I'll try to remember to dig it up. 
> 
> --  
> 
> Rick 
> 

Can you send me an email?

On 10/7/2015 9:37 PM, Nick wrote:
> responding to
> http://www.electrondepot.com/embedded/codewright-error-124860-.htm , Nick
> wrote:
>
> Hi Rick
> Since your last e-mail, here was some more coments and opinion
>
> As today is Wednesday, I was want to remeber your by CW software.
>
> Please let me know if your help is still available and how I go get it.
>
> Tahnk you again all
> Regards
> Nick
>
>> gnuarm  wrote:
>>
>> On 10/1/2015 9:37 PM, Nick wrote: > responding to >
>> http://www.electrondepot.com/embedded/codewright-error-124860-.htm
>> , Nick > wrote: >> david.brown  wrote: >> >> >> > > Hi. I have
>> searched over the internet about
>> Codewright 5.1 and i >> found > on this > forum some old topics. I
>> need to buy
>> Codewright 5.1 >> and i see this >> is > not valid anymore because is
>> an > very old. > Can
>> anyone help me >> PLEASE with a demo evaluation copy ?! > Thank you so
>> much
>> > Nick > > >> I have to ask - /why/ are you desperate to get hold of an
>> outdated >> version of an outdated editor?  There was a time when
>> CodeWrite
>> was a >> top-range programmer's editor, and worth paying for - but these
>> days >> there is a wide range of free editors, many with far more
>> features >> than CodeWrite ever had (and others that are lighter and
>> faster
>> - not >> everyone wants a big and powerful editor).  I can understand
>> that >> someone who has been using CodeWrite for years would want to
>> keep >> using it, but I cannot see why anyone would want it now. >> I
>> have a manual for CodeWrite 5 on my shelf, from 1997.  It
>> sits >> beside some LANtastic for DOS guides, right next to an 8"
>> floppy disk. >> > > > Hi all > Thank you so much for your fast answer.
>> > I need this OLD version (v5.1) because i need to reprogram some OLD
>> building > management panels and i have support and manuals only for this
>> version of > codewright. > As i am not an experimented developer i
>> will have to follow
>> instruction from > this manual to with this version. > If i will get
>> another compiler, i will be probably COMPLETELY LOST.
>> I am > anyway scared about this Codewright 5.1 > I was searched few
>> days (one, tow hours each day) to find this
>> version but it > is completely dispaerd. I tried as well on eBay and
>> Amazon. > I found anyway, Codewright v7.5 but i understand this have
>> some bit
>> difference. > The problem is i have no space for mistakes because this
>> system
>> that i have to > reprogram, is functional, in a bulding and if i make
>> something
>> wrong, system > will not work any more. > Beside of the, programming
>> of this must be made with Microsoft
>> Macro Assembler > MASM v6.1, then compiled with Codewrite and finale,
>> loaded in the
>> master panel > via dedicated Winsweep serial communication software. >
>> > Anyway, if is not a big deal for you, please help me with manual of
>> this 5.1 > version, because, i did;t found manual over internet. >
>> Anyway, i am an very ambitios guy and i will not stop searching
>> until i will > not find a copy > > Thank you so much for all time
>> spent with my problem
>> When you reply, but sure you don't leave the "-- " on the line
>> before your new writing.  That flags it as a signature and makes it
>> hard to
>> read.
>> If your development method is so constrained that you can't use a
>> different editor, you may be in trouble.  If you are not in a big hurry
>> I will check my office when I get back next week and see if I have an
>> old 5.1 CD around.  I know I had a couple of versions and that may be
>> one of them.
>> I'm a little uncomfortable with the legality of this though.  They are
>> still selling Codewright, I think mainly to the mainframe code
>> development market where it was a very popular tool along with PVCS and
>> some other packages.  The price is up there, over $300 I think.  But
>> shoot me an email Wednesday and I'll try to remember to dig it up.
>> --
>> Rick
>
>
>


-- 

Rick