can i replace a bc337-40 with a nte123ap ? searched google but didn't find out too much it for .... http://www.olimex.com/dev/images/pic-pg1-sch.gif Thanks Guys For my project i decided on a pic 16f877 has pretty much all i need on chip
Q:BC337-40 Replacing w/NTE123AP Ok?
Started by ●January 30, 2004
Reply by ●February 2, 20042004-02-02
Ok if it is replaced with a 123ap nte says to rotate 180degrees which would invert e and c ad the 123ap and bc337 have the same ebc pins.... does this make sense? "--|--" <chrispol@videotron.ca> wrote in message news:RwESb.16346$ZV1.311178@weber.videotron.net...> can i replace a bc337-40 with a nte123ap ? searched google but didn't find > out too much > > > it for .... http://www.olimex.com/dev/images/pic-pg1-sch.gif > > Thanks Guys > > For my project i decided on a pic 16f877 has pretty much all i need onchip> >
Reply by ●February 3, 20042004-02-03
"--|--" <chrispol@videotron.ca> wrote in message news:RwESb.16346$ZV1.311178@weber.videotron.net...> can i replace a bc337-40 with a nte123ap ? searched google but didn't find > out too muchI don't know what you are using the transistor for, but a bc337 is a fairly generic part and you shuld be able to find plenty of similar transistor. I am not to familiar with the 2n stuff but 2n3904 seems to get mentioned a fair bit here on SED. I would tend to avoid NTE stuff as its usually quite pricey compared to the standard jelly bean parts.