Thanks Scott. I agree with you that adding a bridge is a silly idea. Marvell has not got a non-PCI version gigabit Ethernet either. I guess we just wait.
Non-PCI gigabit Ethernet controller
Started by ●April 14, 2005
Reply by ●April 19, 20052005-04-19
Reply by ●April 20, 20052005-04-20
DigitalSignal wrote:> Thanks Scott. I agree with you that adding a bridge is a silly idea. > Marvell has not got a non-PCI version gigabit Ethernet either. I guess > we just wait.You'll be waiting a long time. There's no market for a gigabit controller that can only do 10% throughput because of its bus. Have you noticed only 3 products even exist for non-PCI 100Mbps? If you want bragging rights for gigabit in your design, it looks like you'll need to use a PCI bridge, wait for an integrated MCU, or switch to an MCU with PCI. Richard
Reply by ●April 20, 20052005-04-20
On 14 Apr 2005 15:41:46 -0700, "DigitalSignal" <digitalsignal999@yahoo.com> wrote:>I wonder whether somebody provide non-PCI gigabit Ethernet controller.Did you study any (early) 1 GbE switch or other 1 Gb network component? You might find some useful hints about the chips used. Modern 1 Gb switches most likely contain only ASICs, so they are not of any use in your case. Paul
Reply by ●April 20, 20052005-04-20
I gave up on the gigabits now. Can you list the three providers of the non-PCI 100Mbps? I only knew this one: http://www.smsc.com/main/catalog/lan91c96.html
Reply by ●April 21, 20052005-04-21
DigitalSignal wrote:> Can you list the three providers of the non-PCI 100Mbps? I only knew > this one: > http://www.smsc.com/main/catalog/lan91c96.html(That's a 10Mb model; I suspect you meant the one below.) Here are the three, in rough order of their apparent popularity: http://www.smsc.com/main/catalog/lan91c111.html http://www.asix.com.tw/emb-non_ax88796.htm http://www.davicom.com.tw/eng/products/dm9000.htm The Asix has the benefit of being an NE2000 interface, which gives you no shortage of reference drivers. It's been on the scene for about 3 years now, and it's becoming pretty popular, at least relatively speaking. For a proto board of the Asix, go to http://www.edtp.com. Good folks, and it's cheaper than ordering a sample from Taiwan. They'll also sell bare chips if their stock isn't low. Cheers, Richard
Reply by ●April 25, 20052005-04-25