New ICD2 Clone manual and schematic

I've posted an ICD2 PIC Programmer / Debugger on my site
www.blueroomelectronics.com
If you're interested in buying or building an ICD2 or just want a great
PIC programmer read the assembly manual I've posted.

Comments welcome.

"William at MyBlueRoom" <wrichardson@blueroomelectronics.com> wrote in
message news:1158553711.542013.177590@h48g2000cwc.googlegroups.com...
> I've posted an ICD2 PIC Programmer / Debugger on my site
> www.blueroomelectronics.com
> If you're interested in buying or building an ICD2 or just want a great
> PIC programmer read the assembly manual I've posted.
>
> Comments welcome.
>

I like the .pdf , it's very very obvious and tidy.  I like it.

Aly wrote:
> "William at MyBlueRoom" <wrichardson@blueroomelectronics.com> wrote in
> message news:1158553711.542013.177590@h48g2000cwc.googlegroups.com...
> > I've posted an ICD2 PIC Programmer / Debugger on my site
> > www.blueroomelectronics.com
> > If you're interested in buying or building an ICD2 or just want a great
> > PIC programmer read the assembly manual I've posted.
> >
> > Comments welcome.
> >
>
> I like the .pdf , it's very very obvious and tidy.  I like it.

Thank you. I kept it small so  I could print it in booklet form :-) Two
sheets of double sided paper.

The 3D drawing I did with Sketchup. Amazing product. Great for
illustrations.

Well you probably should mention that the PCB layout is not usable as
is in the doc, seems a bit sneaky and almost an ad to me
William at MyBlueRoom wrote:
> Aly wrote:
> > "William at MyBlueRoom" <wrichardson@blueroomelectronics.com> wrote in
> > message news:1158553711.542013.177590@h48g2000cwc.googlegroups.com...
> > > I've posted an ICD2 PIC Programmer / Debugger on my site
> > > www.blueroomelectronics.com
> > > If you're interested in buying or building an ICD2 or just want a great
> > > PIC programmer read the assembly manual I've posted.
> > >
> > > Comments welcome.
> > >
> >
> > I like the .pdf , it's very very obvious and tidy.  I like it.
>
> Thank you. I kept it small so  I could print it in booklet form :-) Two
> sheets of double sided paper.
>
> The 3D drawing I did with Sketchup. Amazing product. Great for
> illustrations.

jay wrote:
> 
> Well you probably should mention that the PCB layout is not usable
> as is in the doc, seems a bit sneaky and almost an ad to me

Please don't top-post.  See the links below.

-- 
 Some informative links:
   news:news.announce.newusers
   http://www.geocities.com/nnqweb/
   http://www.catb.org/~esr/faqs/smart-questions.html
   http://www.caliburn.nl/topposting.html
   http://www.netmeister.org/news/learn2quote.html



-- 
Posted via a free Usenet account from http://www.teranews.com

CBFalconer wrote:
> jay wrote:
> 
>>Well you probably should mention that the PCB layout is not usable
>>as is in the doc, seems a bit sneaky and almost an ad to me
> 
> 
> Please don't top-post.  See the links below.
> 
Thank You Mother CBFalconer.

"Donald" <donald@dontdoithere.com> wrote in message
news:6q-dnQzqUvnhlI7YnZ2dnUVZ_qednZ2d@forethought.net...

> > Please don't top-post.  See the links below.
> >
> Thank You Mother CBFalconer.

I know where you're coming from, but there's one thing worse than top
posting...  One of the local groups that I read had a 20-page conspiracy
post.  The number of people who just clicked reply and posted it over and
over again...........

Sorry, had to say that, it's put me right off a group that's been going for
some 10+ years.  Now taken over by bandwidth hungry self proclaimed XP
experts.

*rants*