working with xilinx edk. I have a sdram of 32M, when I tried to copy data from flash to sdram, it works well only when the accouts is less than 8K, when i copy data, which is more than 8K,it is wrong. it just repeatly copy a little data to sdram,what is the problem should be? I am sure my flash works well.
why not can it access more than 8K of the sdram?
Started by ●November 24, 2006
Reply by ●November 24, 20062006-11-24
xtmtd wrote:> > working with xilinx edk. > I have a sdram of 32M, when I tried to copy data from flash to > sdram, it works well only when the accouts is less than 8K, when > i copy data, which is more than 8K,it is wrong. it just repeatly > copy a little data to sdram,what is the problem should be? I am > sure my flash works well.You don't get any brownie points for asking twice in 4 minutes, and even creating two separate threads with different subject lines. -- Chuck F (cbfalconer at maineline dot net) Available for consulting/temporary embedded and systems. <http://cbfalconer.home.att.net>
Reply by ●November 24, 20062006-11-24
xtmtd wrote:> > working with xilinx edk. > I have a sdram of 32M, --32Mbits or Bytes (8x8)--when I tried tocopy data from flash to sdram,> it works well only when the accouts is less than 8K, when i copy > data, which is more than 8K,it is wrong. it just repeatly copy a > little data to sdram,what is the problem should be? I am sure my > flash works well.--