MIL-STD-1553 RT Addressing

Hi Everyone,

                  Can anyone tell me, How to set the Remote terminal
address for my RT?. Guys we are using DDC-component. The part number is
BU65178 G3 290. This IC has pins to set the Address for RT in two ways,

                One is Hardwired and another is Software programmable.
I am very clear in Hardwired method, but I don`t about software method.

                 I just want to know whether the bus controller will
set the RT address in Software method? If its like that, how it will
send the words ( Command or Data ) to set the RT address?
                 I have found in the NOTICE 2 that RT address should be
done with the help of external connector. Should we have to go for
external connector to set the RT address?

                Hope you understand my query, I am awaiting for your
reply, 

With regards, 
Anand

Hello Anand,

 We were using MIL-STD-1553B long time back and if i remember correctly
we have to set some registers (which i don't remember...). But one
thing i am definitely sure is we can set the RT address thru the S/W.

Kerri


Anand wrote:
> Hi Everyone,
>
>                   Can anyone tell me, How to set the Remote terminal
> address for my RT?. Guys we are using DDC-component. The part number is
> BU65178 G3 290. This IC has pins to set the Address for RT in two ways,
>
>                 One is Hardwired and another is Software programmable.
> I am very clear in Hardwired method, but I don`t about software method.
>
>                  I just want to know whether the bus controller will
> set the RT address in Software method? If its like that, how it will
> send the words ( Command or Data ) to set the RT address?
>                  I have found in the NOTICE 2 that RT address should be
> done with the help of external connector. Should we have to go for
> external connector to set the RT address?
>
>                 Hope you understand my query, I am awaiting for your
> reply, 
> 
> With regards, 
> Anand

Hello Anand,

 We were using MIL-STD-1553B long time back and if i remember correctly
we have to set some registers (which i don't remember...). But one
thing i am definitely sure is we can set the RT address thru the S/W.

Kerri


Anand wrote:
> Hi Everyone,
>
>                   Can anyone tell me, How to set the Remote terminal
> address for my RT?. Guys we are using DDC-component. The part number is
> BU65178 G3 290. This IC has pins to set the Address for RT in two ways,
>
>                 One is Hardwired and another is Software programmable.
> I am very clear in Hardwired method, but I don`t about software method.
>
>                  I just want to know whether the bus controller will
> set the RT address in Software method? If its like that, how it will
> send the words ( Command or Data ) to set the RT address?
>                  I have found in the NOTICE 2 that RT address should be
> done with the help of external connector. Should we have to go for
> external connector to set the RT address?
>
>                 Hope you understand my query, I am awaiting for your
> reply, 
> 
> With regards, 
> Anand