Create Peripheral in XPS / FIFO debug on ChipScope

SW env. ISE8.1 / XPS8.1 / ModelSim / ChipScope 60day ver
HW env. Xilinx virtex2pro xs2vp30

My lab usually work in XPS and ModelSim for Create Embedded IP
creation.
Mostly we use FIFO unit in IP, so it works only when the data packet
was pushed.
Until last week out PhD says to do simulation in ModelSim. But now we
have to debug by ChipScope
I made my IP could work only when data is pushed, but I have no idea
how can I simulate on ChipScope.
Data is pushed and poped to IP in C++ level.

Can ChipScope core catching the data in realtime? I have to know about
inner signals of IP.
If some HW module(IP) doesn't work because of some problem, how can I
solve it?
I think some of you already know about this problem, and might be able
to know solution.

I'm struggling with ChipScope on whole week. But I have no iDea!
There's no usefull example file what I fount it. And also I can't
found textbook for ChipScope.

If you had some usefull books about ChipScope or ISE debugging tool,
please give me the information.

please and thanks for your apply.

Charlie Yang wrote:
> 
... snip ...
> 
> Can ChipScope core catching the data in realtime? I have to know
> about inner signals of IP.  If some HW module(IP) doesn't work
> because of some problem, how can I solve it? ...

It might help to describe ChipScope to those of us who might then
understand.  It is also not necessary to post the same message
three times, although that may well be caused by use of the
inferior Google news interface.

-- 
 <http://www.cs.auckland.ac.nz/~pgut001/pubs/vista_cost.txt>
 <http://www.securityfocus.com/columnists/423>
 
 "A man who is right every time is not likely to do very much."
                           -- Francis Crick, co-discover of DNA
 "There is nothing more amazing than stupidity in action."
                                             -- Thomas Matthews