Broken TCP/IP packets

On Apr 11, 12:27 am, "MisterE" <v...@sometwher.world> wrote:
> > So your reciveing end simply must be written so as it keeps on reading
> > from the TCP stream up until you have 20 bytes, and store excess bytes
> > it may have read for the next call. This can easily be implemented
> > with a ring buffer structure and as many calls to recv() as needed.
>
> > If you try to circumvent this, you are fighting against TCP and
> > potential oddities/requierements of the unterlaying network along the
> > comunication path.
>
> No converter will break up a 20 byte burst into multiple packets. If this is
> happeneing its the worst converter I have ever seen. If the packets were
> 2,000 bytes then maybe, but I have never seen a converter send while data is
> still being recieved. I suspect the user has set a setting wrong on the
> device to only allow 10 byte buffer or something. We have 300byte packets
> and have NEVER seen on brocken out of hundreds of thousands (I programmed it
> to log these and it has never happened).

What converter in market you will recommend ?

ali