jtagice mk1

hello,

well my problem is that i have a jtagice mk1 and i would like to use the
jtag feature for programming more than what it states it works with could
someone advise me if the winarm project would support this programming
device for more micros so it can be possible to program more of the atmel
family of micro controllers ie. arm family of 32bit micros.

my thought was that all the micros that demanded a jtag programmer wouldbe
compatible to be programmed .

if someone could be so kind as to point me in the right direction to make
this possible ..

thank you 


milo_00    

On Sep 30, 6:02 am, "milo_00" <david_mcintyr...@hotmail.com> wrote:
> hello,
>
> well my problem is that i have a jtagice mk1 and i would like to use the
> jtag feature for programming more than what it states it works with could
> someone advise me if the winarm project would support this programming
> device for more micros so it can be possible to program more of the atmel
> family of micro controllers ie. arm family of 32bit micros.

No, it cannot program anything other than the listed one.  It checks
for the device ID specifically.

>
> my thought was that all the micros that demanded a jtag programmer wouldbe
> compatible to be programmed .

Same argument as a PC can program any micro, just need to do the
software.

>
> if someone could be so kind as to point me in the right direction to make
> this possible ..

Which micro are you trying to program?

>
> thank you
>
> milo_00