Hi, I'd like to design a simple and *cheap* device with a full-speed USB capacity - thought I'd use M8 CY7C64113. Unfortunately I haven't been able to locate any software emulators for the chip, so I'm kind of stuck. I'd definitely prefer not to pay 1200$ for CY3654 + CY3654-PO3. Are there any cheaper alternatives? Or maybe some software emulators I've overlooked? Could I somehow use the PSoC IDE to implement at least some functionality that is not USB specific? Or is it a completely different architecture? Could you propose any other microcontrollers that have an innate full-speed USB support, a similar (low) price and good developement tools (possibly software emulators)? Another thing - I couldn't find any information about protection bits (that disable access to the program memory) in Cypress chips. Does this mean that they don't have such functionality? thanks in advance SM
Programming Cypress full-speed USB microcontrollers
Started by ●September 19, 2004
Reply by ●September 19, 20042004-09-19
You could use basically any type of cpu coupled with a Philips PDIUSB12 chip. We currently use it with a MC68HC9S12A64, not that we need the horsepower, but rather the memory. But works well. PW "SM" <nospam@post.com> wrote in message news:cik01g$9nf$1@atlantis.news.tpi.pl...> Hi, > > I'd like to design a simple and *cheap* device with a full-speed USB > capacity - thought I'd use M8 CY7C64113. Unfortunately I haven't been able > to locate any software emulators for the chip, so I'm kind of stuck. I'd > definitely prefer not to pay 1200$ for CY3654 + CY3654-PO3. Are there any > cheaper alternatives? Or maybe some software emulators I've overlooked? > Could I somehow use the PSoC IDE to implement at least some functionality > that is not USB specific? Or is it a completely different architecture? > Could you propose any other microcontrollers that have an innatefull-speed> USB support, a similar (low) price and good developement tools (possibly > software emulators)? > > Another thing - I couldn't find any information about protection bits(that> disable access to the program memory) in Cypress chips. Does this meanthat> they don't have such functionality? > > thanks in advance > SM > >
Reply by ●September 26, 20042004-09-26
"SM" <nospam@post.com> wrote in news:cik01g$9nf$1@atlantis.news.tpi.pl:> I'd like to design a simple and *cheap* device with a full-speed USB > capacity - thought I'd use M8 CY7C64113.<snip> According to a Cypress sales rep, the 64113 is due to be discontinued Q2 05. The 64013 is currently being phased out. The best alternatives we've found are the Texas Instruments TUSB3210/3410. These have 8052 cores but development tools for the USB specific features are lacking. All examples are in C. These require external firmware download via host or EEPROM so if you have strict requirements for code security they're probably not going to work for you. Atmel and Freescale have full speed capable controllers that are somewhat more expensive. The Freescale is actually high speed but can run full. National and Philips have interfaces that can work with any micro. They're close to the cost of the Cypress parts, however. A fairly comprehensive list is here: http://www.lvr.com/usbchips.htm> Another thing - I couldn't find any information about protection bits > (that disable access to the program memory) in Cypress chips. Does > this mean that they don't have such functionality?The 64013 has a security fuse so I believe the 64113 does as well. Doug