Any low cost solution for flash programming on PowerPC 405GP JTAG?

[Test] I am trying to use a real news server rather than posting
from google.groups. Sorry for repeat posts if you did not filter
it before. I wonder in order to avoid treating as SPAM, should I
assign email address other than my gmail account? ^_^ Or will my
post be still SPAM-like even if I send articles through real news
server?

Howdy,

    I have a PowerPC 405GP Walnut eval board. Recently, by accident,
the flash which stores U-Boot is corrupted. Therefore the board cannot
boot now. I want to use the JTAG port on the board to rewrite the
flash with new U-Boot. I found many products for this propers, but
they are too expensive for me. It costs $1000-$3000... >_<  Eg:
BDI2000, Silicon Probe... What I really want is simply use JTAG
wiggler and a flash programmer to download uboot into flash. That's
all! Nothing else. It would be very pleased if anyone can tell me some
relatively low cost method to do so.
    Thank you very much.

---
ShenLei 

ShenLei wrote:
> 
> [Test] I am trying to use a real news server rather than posting
> from google.groups. Sorry for repeat posts if you did not filter
> it before. I wonder in order to avoid treating as SPAM, should I
> assign email address other than my gmail account? ^_^ Or will my
> post be still SPAM-like even if I send articles through real news
> server?

However you are using the flawed Outlook Express.  I suggest you
just get an installation unit for Thunderbird (see mozilla.com) and
install that.

Your email address doesn't affect the handling on Usenet.  You can
use anything you like.  I suggest putting your real email address
into the Reply-to: field, where it is not conveniently accessible
for spammers.

-- 
 [mail]: Chuck F (cbfalconer at maineline dot net) 
 [page]: <http://cbfalconer.home.att.net>
            Try the download section.


** Posted from http://www.teranews.com **