Hello, I'm a student and want to know what kinds of board to purchase? I need a reliable board with a decent price. Is Axiom student version board CME-E for $89 any good? How about HC11 F1 Board http://www.aspisys.com/f1.htm or EVBplus board for $99 or should I consider the EVBplus2 board for $129 student version at http://www.evbplus.com/. |
|
MC68HC11Evaluation Board EVB
Started by ●February 6, 2003
Reply by ●February 6, 20032003-02-06
--- In , "xcela2001 <xcela2001@y...>" <xcela2001@y...> wrote: > Hello, I'm a student and want to know what kinds of board to > purchase? I need a reliable board with a decent price. Is Axiom > student version board CME-E for $89 any good? How about HC11 F1 Board > http://www.aspisys.com/f1.htm or EVBplus board for $99 or should I > consider the EVBplus2 board for $129 student version at > http://www.evbplus.com/. Also, how about Adapt11EVBU Combo Package from http://www.technologicalarts.com/myfiles/t1.html#EVBU |
Reply by ●February 6, 20032003-02-06
I have used the Axiom CME-11E9-EVBU with one of my classes. It worked fine for the students. I believe it was about $130. However, I think my favorite was Motorola's EVBU board at about $70. Unfortunately, I don't think it is available any more. Emmett Redd Ph.D. mailto: Associate Professor (417)836-5221 Department of Physics, Astronomy, and Material Science Southwest Missouri State University Fax (417)836-6226 901 SOUTH NATIONAL Dept (417)836-5131 SPRINGFIELD, MO 65804 USA > -----Original Message----- > From: xcela2001 <> [mailto:] > Sent: Thursday, February 06, 2003 2:28 PM > To: > Subject: [m68HC11] MC68HC11Evaluation Board EVB > > Hello, I'm a student and want to know what kinds of board to > purchase? I need a reliable board with a decent price. Is Axiom > student version board CME-E for $89 any good? How about HC11 F1 Board > http://www.aspisys.com/f1.htm or EVBplus board for $99 or should I > consider the EVBplus2 board for $129 student version at > http://www.evbplus.com/. > ------------------------ Yahoo! Groups Sponsor > > To unsubscribe from this group, send an email to: > > > ">http://docs.yahoo.com/info/terms/ > |
Reply by ●February 6, 20032003-02-06
Reply by ●February 6, 20032003-02-06
----- Original Message ----- From: <> To: <> Sent: Thursday, February 06, 2003 2:27 PM Subject: [m68HC11] MC68HC11Evaluation Board EVB : Hello, I'm a student and want to know what kinds of board to : purchase? I need a reliable board with a decent price. Is Axiom : student version board CME-E for $89 any good? How about HC11 F1 Board : http://www.aspisys.com/f1.htm or EVBplus board for $99 or should I : consider the EVBplus2 board for $129 student version at : http://www.evbplus.com/. : Find out what kind of boards they use for classes on campus if you can or find a board that some one has done a lot of work with that you can get to help you if you can. Having local support is really nice if you can find it. If you have to start from scratch consider New Micros boards. I have had excellent support from them and used them to develop several products. The larger board can be emulate almost any 68HC11 configuration. They come with FORTH burned into the OTPROM on the chip and have a basic, small c and assembler for the 68HC11 that comes with them. The FORTH is a professional product. Small c is not a standard C compiler but I have seen substantial products done with it. I think the assembler is the Motorola assembler and I have not used the basic. Here is what I use it is an inexpensive set of tools that can do full scale development. The editor is out of date and not supported and has some difficulties with Windows XP but still works well enough that I haven't looked for something else. I would suggest that it not be used for someone starting out. If someone has a better candidate for a simple editor I would be interested in hearing about it. http://www.couger.com/gcouger/newmicros.html Good luck Gordon Gordon Couger Stillwater, OK www.couger.com/gcouger |
Reply by ●February 7, 20032003-02-07
I have found that standard Windows WordPad makes a "useable"
program editor if all else fails. It will usually work smoothly with whatever version of Windows that is is packaged with. _However_, you must be careful not to use any font control or formating functions. If you do so it will puke out all of the embedded document formatting crap. Just stick to simple ASCII editing functions and always save as a "text" file. I have never found an assembler or compiler that will suffer the embedded formating garbage gracefully. Good luck, Bob Smith --- Avoid computer viruses, Practice safe hex --- -- Specializing in small, cost effective embedded control systems -- Robert L. (Bob) Smith Smith Machine Works, Inc. 9900 Lumlay Road Richmond, VA 23236 804/745-1065 ----- Original Message ----- From: "Gordon Couger" <> To: <> Sent: Thursday, February 06, 2003 9:19 PM Subject: Re: [m68HC11] MC68HC11Evaluation Board EVB > > ----- Original Message ----- > From: <> > To: <> > Sent: Thursday, February 06, 2003 2:27 PM > Subject: [m68HC11] MC68HC11Evaluation Board EVB > : Hello, I'm a student and want to know what kinds of board to > : purchase? I need a reliable board with a decent price. Is Axiom > : student version board CME-E for $89 any good? How about HC11 F1 Board > : http://www.aspisys.com/f1.htm or EVBplus board for $99 or should I > : consider the EVBplus2 board for $129 student version at > : http://www.evbplus.com/. > : > Find out what kind of boards they use for classes on campus if you can or > find a board that some one has done a lot of work with that you can get to > help you if you can. Having local support is really nice if you can find it. > > If you have to start from scratch consider New Micros boards. I have had > excellent support from them and used them to develop several products. The > larger board can be emulate almost any 68HC11 configuration. They come with > FORTH burned into the OTPROM on the chip and have a basic, small c and > assembler for the 68HC11 that comes with them. The FORTH is a professional > product. Small c is not a standard C compiler but I have seen substantial > products done with it. I think the assembler is the Motorola assembler and I > have not used the basic. > > Here is what I use it is an inexpensive set of tools that can do full scale > development. The editor is out of date and not supported and has some > difficulties with Windows XP but still works well enough that I haven't > looked for something else. I would suggest that it not be used for someone > starting out. If someone has a better candidate for a simple editor I would > be interested in hearing about it. > http://www.couger.com/gcouger/newmicros.html > > Good luck > Gordon > > Gordon Couger > Stillwater, OK > www.couger.com/gcouger > > To unsubscribe from this group, send an email to: > > > ">http://docs.yahoo.com/info/terms/ > |
|
Reply by ●February 7, 20032003-02-07
Try NoteTab Light. Its for free, and a good editor. It works in Windows 98. Im not sure if it works in Windows XP. The web page is: http://www.fookes.com/notetab/index.html Gordon Couger ha escrito: > ... The editor is out of date and not supported and has some > difficulties with Windows XP but still works well enough that I haven't > looked for something else. I would suggest that it not be used for someone > starting out. If someone has a better candidate for a simple editor I would > be interested in hearing about it. best regards, Hugo Pratt |
Reply by ●February 7, 20032003-02-07
Rather than mess about with WordPad or NotePad use Programmer's File
Editor. It's no longer being developed (it was sold to Microchip) but, the final free public release is very powerful. You can get it at: http://www.simtel.net/pub/dl/11983.shtml or http://www.winsite.com/bin/Info?500000017700 Paul > -----Original Message----- > From: Robert Smith [mailto:] > Subject: Re: [m68HC11] MC68HC11Evaluation Board EVB > I have found that standard Windows WordPad makes a "useable" > program editor > if all else fails. It will usually work smoothly with whatever version of > Windows that is is packaged with. > > _However_, you must be careful not to use any font control or formating > functions. If you do so it will puke out all of the embedded document > formatting crap. Just stick to simple ASCII editing functions and always > save as a "text" file. I have never found an assembler or compiler that > will suffer the embedded formating garbage gracefully. > > Good luck, Bob Smith |