Hi Roger,

Great program, thanks. One feature that would be great as well as
supporting non FBR LPC's is the ability to manually edit the required
baudrate field. i.e. if I wanted to run at 250000 baud (DMX) or 31250
baud (MIDI) or some other non standard rate. 

Thanks again for the tool, just some ideas for improvements.

Cheers

Martin

--- In lpc2000@lpc2..., "roger_lynx" <roger_lynx@...> wrote:

> You might want to look at this LPC214x FractCalc I
put together with a
> PLL calculator, PDF and ASCII viewers.
> It is a Win GUI applet; subject to continuous improvements, but usable.
> Check the bottom of this page:
> http://www.rogerlynx.com/html/support.html
> <http://www.rogerlynx.com/html/support.html>
> 
> Hope this helps.
> 
> Roger
>
	

Hi Mrs. Wright
  Could you email me that also?
  Thank you.
	kathy_wright_ca <kathy_wright_ca@kath...> wrote:
  I like simple solutions, and I have an Excel solution that also makes 
it easy to see what's going on, and it includes accuracy 
calculations.  

I can email to you if you like 

Kathy Wright
	> 
> --- In lpc2000@lpc2..., "dodge1955"
<sutton@> wrote:
> >
> > Has anyone ever done some type of spreadsheet on the different 
UxDLL
> > and UxDLM values along with MULVAL and DIVVAL
for the most popular
> > crystals to make the baud rate come out perfect (like 9600, 19200,
> > etc).  The manual has the examples for 20Mhz, but it would be 
nice to
> > have some appendix that has a table of values
that come out even 
for a
> > variety of commonly used crystals.  11.059Mhz
is obviously an easy
> > one, but others like 12Mhz, 15Mhz, etc. are not as easy and I know
> > some crystals may not have a perfect value and thus have an error
> factor.
> >
> > Sutton - dodge55
> >
> 
> 
> 
> 
>
	  SPONSORED LINKS 
        Microcontrollers   Microprocessor   Intel microprocessors     Pic
microcontrollers 
    
---------------------------------
  YAHOO! GROUPS LINKS
	---------------------------------
	---------------------------------
	
	

I would like a copy as well if you don't mind.
	--- In lpc2000@lpc2..., Tong Le <gaquaycalifornia@...> wrote:
>
> Hi Mrs. Wright
>   Could you email me that also?
>   Thank you.
>   
> 
> kathy_wright_ca <kathy_wright_ca@...> wrote:
>   I like simple solutions, and I have an Excel solution that also makes 
> it easy to see what's going on, and it includes accuracy 
> calculations.  
> 
> I can email to you if you like 
> 
> Kathy Wright
> 
> 
> > 
> > --- In lpc2000@lpc2..., "dodge1955" <sutton@> wrote:
> > >
> > > Has anyone ever done some type of spreadsheet on the different 
> UxDLL
> > > and UxDLM values along with MULVAL and DIVVAL for the most
popular
> > > crystals to make the baud rate come out perfect (like 9600,
19200,
> > > etc).  The manual has the examples for 20Mhz, but it would be 
> nice to
> > > have some appendix that has a table of values that come out even 
> for a
> > > variety of commonly used crystals.  11.059Mhz is obviously an
easy
> > > one, but others like 12Mhz, 15Mhz, etc. are not as easy and I
know
> > > some crystals may not have a perfect value and thus have an error
> > factor.
> > >
> > > Sutton - dodge55
> > >
> > 
> > 
> > 
> > 
> >
> 
> 
> 
> 
> 
> 
> 
>   SPONSORED LINKS 
>         Microcontrollers   Microprocessor   Intel microprocessors  
  Pic microcontrollers 
>     
> ---------------------------------
>   YAHOO! GROUPS LINKS 
> 
>     
>      
> 
>     
> ---------------------------------
>   
> 
> 
> 
> 			
> ---------------------------------
>  
> 
> 
>
	

Hi,
may I have it too. Or could you  upload it to the LPC200 file section?

Thanks
Philipp

lpc2000@lpc2... schrieb am 02.03.06 07:33:23:
> 
> Hi Mrs. Wright
>   Could you email me that also?
>   Thank you.
>   
> 
> kathy_wright_ca <kathy_wright_ca@kath...> wrote:
>   I like simple solutions, and I have an Excel solution that also makes 
> it easy to see what's going on, and it includes accuracy 
> calculations.  
> 
> I can email to you if you like 
> 
> Kathy Wright
> 
> 
> > 
> > --- In lpc2000@lpc2..., "dodge1955" <sutton@> wrote:
> > >
> > > Has anyone ever done some type of spreadsheet on the different 
> UxDLL
> > > and UxDLM values along with MULVAL and DIVVAL for the most
popular
> > > crystals to make the baud rate come out perfect (like 9600,
19200,
> > > etc).  The manual has the examples for 20Mhz, but it would be 
> nice to
> > > have some appendix that has a table of values that come out even 
> for a
> > > variety of commonly used crystals.  11.059Mhz is obviously an
easy
> > > one, but others like 12Mhz, 15Mhz, etc. are not as easy and I
know
> > > some crystals may not have a perfect value and thus have an error
> > factor.
> > >
> > > Sutton - dodge55
> > >
> > 
> > 
> > 
> > 
> >
> 
> 
> 
> 
> 
> 
> 
>   SPONSORED LINKS 
>         Microcontrollers   Microprocessor   Intel microprocessors     Pic
microcontrollers 
>     
> ---------------------------------
>   YAHOO! GROUPS LINKS 
> 
>     
>      
> 
>     
> ---------------------------------
>   
> 
> 
> 
> 			
> ---------------------------------
>  
> 
> 
> 
> 
> 
>  
> Yahoo! Groups Links
> 
> 
> 
>  
> 
>
	______________________________________________________________
Verschicken Sie romantische, coole und witzige Bilder per SMS!
Jetzt bei WEB.DE FreeMail: http://f.web.de/?mc1193