I'm getting the error when I fire up OCD_CMDL.exe: MAC_MOT.sys cannot be found Its in the windows32/drivers dir, and I copied it also to the "C:\Program Files\Macraigor Systems\OCD Commander\Ocd_cmdl.exe" to see if it sould fine it then, no luck. |
|
Wiggler: OCD_CMDL.exe MAC_MOT.sys cannot be found
Started by ●April 20, 2004
Reply by ●April 20, 20042004-04-20
I re-downloaded and installed the wiggler SW and its ok now. thanks. --- In , "Lee Studley" <indigo_red@q...> wrote: > I'm getting the error when I fire up OCD_CMDL.exe: > > MAC_MOT.sys cannot be found > > Its in the windows32/drivers dir, and I copied it also to > the "C:\Program Files\Macraigor Systems\OCD Commander\Ocd_cmdl.exe" > to see if it sould fine it then, no luck. |
Reply by ●April 21, 20042004-04-21
----- Original Message ----- From: "Lee Studley" <> To: <> Sent: Wednesday, April 21, 2004 1:31 AM Subject: [lpc2000] Wiggler: OCD_CMDL.exe MAC_MOT.sys cannot be found > I'm getting the error when I fire up OCD_CMDL.exe: > > MAC_MOT.sys cannot be found > > Its in the windows32/drivers dir, and I copied it also to > the "C:\Program Files\Macraigor Systems\OCD Commander\Ocd_cmdl.exe" > to see if it sould fine it then, no luck. You should get an initial window called 'CONNection Dialog ...' which allows you to select the OCD Interface Device - Wiggler in this case - and the target processor - ARM and ARM7xxx. You also need to set the LPT port number and the OCD speed - try 6 initially. Do you get that window? Leon |
|
Reply by ●April 21, 20042004-04-21
Hi Leon, All is working now, and thanks for the information and patience :-) My main issue was not having pin 27 pulled high. I redownloaded the Macraiger tools and reinstalled and I think it/they corrected something because the issues went away. I'm really impressed with the Crossworks demo!!! I'm going to go through the GNU stuff for the experience, but I like Crossworks alot so that's what I will invest in. I'll send you pictures of your board and my wiggler setup so you can add them to the satisfied customer info. Thanks -Lee > You should get an initial window called 'CONNection Dialog ...' which allows > you to select the OCD Interface Device - Wiggler in this case - and the > target processor - ARM and ARM7xxx. You also need to set the LPT port number > and the OCD speed - try 6 initially. > > Do you get that window? > > Leon |
Reply by ●April 22, 20042004-04-22
I think it doesn't work for Win NT and other variants of it. --- In , "Leon Heller" <leon_heller@h...> wrote: > > ----- Original Message ----- > From: "Lee Studley" <indigo_red@q...> > To: <> > Sent: Wednesday, April 21, 2004 1:31 AM > Subject: [lpc2000] Wiggler: OCD_CMDL.exe MAC_MOT.sys cannot be found > > I'm getting the error when I fire up OCD_CMDL.exe: > > > > MAC_MOT.sys cannot be found > > > > Its in the windows32/drivers dir, and I copied it also to > > the "C:\Program Files\Macraigor Systems\OCD Commander\Ocd_cmdl.exe" > > to see if it sould fine it then, no luck. > > You should get an initial window called 'CONNection Dialog ...' which allows > you to select the OCD Interface Device - Wiggler in this case - and the > target processor - ARM and ARM7xxx. You also need to set the LPT port number > and the OCD speed - try 6 initially. > > Do you get that window? > > Leon |
|