How can I copy a binary file from the PC to internal flash of a LPC2292?
I must implement a IAP programm or convert binary file in hex and after
copy it with ISP like "flash Magic"?
How can I create a hex file from binary with an offset (0x020000 in my
application) in the output file?

Thanks Fabio Start a New Thread

Hello Fabio,

Which is the IDE you are using? I am using MDK-ARM with Keil-uVision and has
an example for LPC2130 that use a program to convert a WAV file (BIN) in HEX
file and you should change the address range and other parameters. So, the
IDE program first the HEX file and after the application code.

You can download the evaluation version in Keil Website and verify its.

https://www.keil.com/demo/eval/arm.htm

Regards,

Cesar de Almeida
2007/6/6, fabicenn :
>
> How can I copy a binary file from the PC to internal flash of a LPC2292?
> I must implement a IAP programm or convert binary file in hex and after
> copy it with ISP like "flash Magic"?
> How can I create a hex file from binary with an offset (0x020000 in my
> application) in the output file?
>
> Thanks Fabio
> Start a New Thread

Hi

I use keil uVision3 also, but I haven't find this example. Where is?
can you send me address or file .zip?
I can't able to divide binary file from application code

thanks Fabio

--- In l..., "Car de Almeida"
wrote:
>
> Hello Fabio,
>
> Which is the IDE you are using? I am using MDK-ARM with Keil-
uVision and has
> an example for LPC2130 that use a program to convert a WAV file
(BIN) in HEX
> file and you should change the address range and other parameters.
So, the
> IDE program first the HEX file and after the application code.
>
> You can download the evaluation version in Keil Website and verify
its.
>
> https://www.keil.com/demo/eval/arm.htm
>
> Regards,
>
> Cesar de Almeida
> 2007/6/6, fabicenn :
> >
> > How can I copy a binary file from the PC to internal flash of a
LPC2292?
> > I must implement a IAP programm or convert binary file in hex and
after
> > copy it with ISP like "flash Magic"?
> > How can I create a hex file from binary with an offset (0x020000
in my
> > application) in the output file?
> >
> > Thanks Fabio
> >
> >
> >
>
> Start a New Thread

Hello Fabio,

The example is on folder Keil\ARM\RV30\Boards\Keil\MCB2130\VoicePlayer .
This sample uses a script file to load the .hex file and program in your
device. The bat file convert.bat on folder
\Keil\ARM\RV30\Boards\Keil\MCB2130\VoicePlayer\AudioData has a initial
configuration for making this convertion. This file should be edited. Below
are the help:
BIN2HEX Version 1.06
Copyright (c) 1993-1995 BITWARE.
All rights reserved.

Syntax: BIN2HEX [/option] binfile [hexfile]

is the binary input file
is the Intel HEX file to create

may be any of the following

/Ln Bytes to read from binary file
/In Binary file starting offset
/On Output file address offset (where HEX data starts)
/M Merge data into existing HEX file
/2 Generate HEX file using ext. segment address records (HEX86)
/4 Generate HEX file using ext. linear address records (HEX386)
/Q Quiet mode (no statistics are displayed)
/T Exclude EOF record
/A Append to end of existing HEX file

/? This help text
Regards,

Cesar de Almeida
2007/6/6, fabicenn :
>
> Hi
>
> I use keil uVision3 also, but I haven't find this example. Where is?
> can you send me address or file .zip?
> I can't able to divide binary file from application code
>
> thanks Fabio
>
> --- In l... , "Car de
> Almeida"
> wrote:
> >
> > Hello Fabio,
> >
> > Which is the IDE you are using? I am using MDK-ARM with Keil-
> uVision and has
> > an example for LPC2130 that use a program to convert a WAV file
> (BIN) in HEX
> > file and you should change the address range and other parameters.
> So, the
> > IDE program first the HEX file and after the application code.
> >
> > You can download the evaluation version in Keil Website and verify
> its.
> >
> > https://www.keil.com/demo/eval/arm.htm
> >
> > Regards,
> >
> > Cesar de Almeida
> >
> >
> > 2007/6/6, fabicenn :
> > >
> > > How can I copy a binary file from the PC to internal flash of a
> LPC2292?
> > > I must implement a IAP programm or convert binary file in hex and
> after
> > > copy it with ISP like "flash Magic"?
> > > How can I create a hex file from binary with an offset (0x020000
> in my
> > > application) in the output file?
> > >
> > > Thanks Fabio
> > >
> > >
> > >
> >
> >
> >
> Start a New Thread