--- In l..., pra bu wrote:
> Anyone please confirm my understanding is correct.If not,please guide me?
>
> Thanks for all supports.

Hi Pra

You seem to have understood everything. Try loading code and stepping through it from the Reset_Handler (which will be called immediately). Then you can check the SP (value will be the same as at address 0x00000000) and verify that all initialisations take place as expected.

Regards

Mark

Start a New Thread

Mark,
Thanks!.

Hi all,
Thanks for all of ur supports.Now i understood the porting steps of CortexM3 from ARM7.
I will update u if i have any doubts.

Thanks,
Prabu

________________________________
From: Mark
To: l...
Sent: Tue, 16 March, 2010 5:09:22 PM
Subject: [lpc2000] Re: Need startup file for LPC176x with GNUARM,FreeRTOS

--- In lpc2000@yahoogroups .com, pra bu wrote:
> Anyone please confirm my understanding is correct.If not,please guide me?
>
> Thanks for all supports.

Hi Pra

You seem to have understood everything. Try loading code and stepping through it from the Reset_Handler (which will be called immediately) . Then you can check the SP (value will be the same as at address 0x00000000) and verify that all initialisations take place as expected.

Regards

Mark

Your Mail works best with the New Yahoo Optimized IE8. Get it NOW! http://downloads.yahoo.com/in/internetexplorer/ Start a New Thread