Hi
I know that its not a LPC2000 problem but.
I had to purchase new PCs and Laptops which comes with Windows7 64Bit OS.
The tools do not work with the above.
Eclipse works fine but the Make etc does not run.
However the tools does work with Windows7 32Bit.
Any comments
Regards
Jean-Jacques
Using Yargarto tools with Windows7 64Bits OS
Started by ●October 7, 2010
Reply by ●October 8, 20102010-10-08
Hi Jean-Jacques.
They work, the trick is install al the toolchain files OUTSIDE "Program Files" (or "Program Files (x86)". Use "C:\Yagarto" for example.
Also you could try "compatibility mode" (right click, Compatibility tab, etc)
Im using previous (outdated) versions of the toolchain, with no problem.
Cheers
They work, the trick is install al the toolchain files OUTSIDE "Program Files" (or "Program Files (x86)". Use "C:\Yagarto" for example.
Also you could try "compatibility mode" (right click, Compatibility tab, etc)
Im using previous (outdated) versions of the toolchain, with no problem.
Cheers
Reply by ●October 8, 20102010-10-08
That works
YOU ARE A STAR!!!!
Thanks
Jean-Jacques
--- In l..., "gasparpollano" wrote:
>
> Hi Jean-Jacques.
>
> They work, the trick is install al the toolchain files OUTSIDE "Program Files" (or "Program Files (x86)". Use "C:\Yagarto" for example.
> Also you could try "compatibility mode" (right click, Compatibility tab, etc)
> Im using previous (outdated) versions of the toolchain, with no problem.
>
> Cheers
>
YOU ARE A STAR!!!!
Thanks
Jean-Jacques
--- In l..., "gasparpollano" wrote:
>
> Hi Jean-Jacques.
>
> They work, the trick is install al the toolchain files OUTSIDE "Program Files" (or "Program Files (x86)". Use "C:\Yagarto" for example.
> Also you could try "compatibility mode" (right click, Compatibility tab, etc)
> Im using previous (outdated) versions of the toolchain, with no problem.
>
> Cheers
>