I've redesigned my little prototyping PCB for the DIP8 LPC810, adding a
jumper to enable bootloading and a 3x1 connector for Flash Magic
downloading (TxD, RxD and Gnd). The Gerbers have been sent off to ITead.
If anyone wants one of the old PCBs, please send me an email with your
address. The LPC810 doesn't seem to be available for sale, but you might
be able to get some samples out of NXP.
I haven't heard from the two people to whom I sent sample devices.
The only other people who seem to be playing with them are Ohneta and
Yacicci (in Japan, I think) who have some clips on YouTube:
https://www.youtube.com/user/ohneta
https://www.youtube.com/user/yacicci/videos
Leon
--
Leon Heller
G1HSM
LPC810 update
Started by ●April 7, 2013
Reply by ●April 8, 20132013-04-08
I've been working with the LPC810 a bit in DIP8, but ended up having to
drop down to a makefile and writing my own peripheral code since the canned NXP
ones are a bit large for a part with 4KB flash and 1KB SRAM.
https://github.com/microbuilder/LPC810_CodeBase
https://github.com/microbuilder/LPC810_CodeBase