Been working with LPC2138 with IAR just fine. Trying to move to smaller
LPC2131. When I download the same app it won't run to main. Anybody do
this yet?
I think I'm looking for the equivalent LPC2138.i79 and iolpc2138.ddf
(device description file) for the 2131. Anything else?
Thanks, Jeff
IAR compiler and the LPC2131
Started by ●April 8, 2005
Reply by ●April 8, 20052005-04-08
Hi Jeff,
I just checked my version and only found a lpc2130.i79 and ddf. I am
currently running 4.11.
regards,
Charles
--- In lpc2000@lpc2..., "Lowry, Jeff" <jlowry@s...> wrote:
> Been working with LPC2138 with IAR just fine. Trying to move to smaller
> LPC2131. When I download the same app it won't run to main. Anybody do
> this yet?
>
> I think I'm looking for the equivalent LPC2138.i79 and iolpc2138.ddf
> (device description file) for the 2131. Anything else?
>
> Thanks, Jeff >
Reply by ●April 8, 20052005-04-08
Thanks Charles. Mine too. I'm not aware of a philips 2130...just
2131/2/8. I wonder if the 2130 is really 2131...I'll give it a try.
Jeff.
-----Original Message-----
From: charlesgrenz [mailto:charles.grenz@char...]
Sent: Friday, April 08, 2005 8:26 AM
To: lpc2000@lpc2...
Subject: [lpc2000] Re: IAR compiler and the LPC2131
Hi Jeff,
I just checked my version and only found a lpc2130.i79 and
ddf. I am
currently running 4.11.
regards,
Charles
--- In lpc2000@lpc2..., "Lowry, Jeff" <jlowry@s...>
wrote:
> Been working with LPC2138 with IAR just fine. Trying to move
to smaller
> LPC2131. When I download the same app it won't run to main.
Anybody do
> this yet?
>
> I think I'm looking for the equivalent LPC2138.i79 and
iolpc2138.ddf
> (device description file) for the 2131. Anything else?
>
> Thanks, Jeff >
________________________________
> .
2131/2/8. I wonder if the 2130 is really 2131...I'll give it a try.
Jeff.
-----Original Message-----
From: charlesgrenz [mailto:charles.grenz@char...]
Sent: Friday, April 08, 2005 8:26 AM
To: lpc2000@lpc2...
Subject: [lpc2000] Re: IAR compiler and the LPC2131
Hi Jeff,
I just checked my version and only found a lpc2130.i79 and
ddf. I am
currently running 4.11.
regards,
Charles
--- In lpc2000@lpc2..., "Lowry, Jeff" <jlowry@s...>
wrote:
> Been working with LPC2138 with IAR just fine. Trying to move
to smaller
> LPC2131. When I download the same app it won't run to main.
Anybody do
> this yet?
>
> I think I'm looking for the equivalent LPC2138.i79 and
iolpc2138.ddf
> (device description file) for the 2131. Anything else?
>
> Thanks, Jeff >
________________________________
> .
Reply by ●April 8, 20052005-04-08
Hi Jeff,
There isn't one. I assumed that it should read 213x since there is
no actual part 2130. I have my rep. looking into it now to be on the
safe side and I like to know how they specify the memory map for the 3
different versions.
Charles
--- In lpc2000@lpc2..., "Lowry, Jeff" <jlowry@s...> wrote:
> Thanks Charles. Mine too. I'm not aware of a philips 2130...just
> 2131/2/8. I wonder if the 2130 is really 2131...I'll give it a try.
> Jeff.
>
> -----Original Message-----
> From: charlesgrenz [mailto:charles.grenz@s...]
> Sent: Friday, April 08, 2005 8:26 AM
> To: lpc2000@lpc2...
> Subject: [lpc2000] Re: IAR compiler and the LPC2131 >
> Hi Jeff,
> I just checked my version and only found a lpc2130.i79 and
> ddf. I am
> currently running 4.11.
>
> regards,
> Charles
>
> --- In lpc2000@lpc2..., "Lowry, Jeff" <jlowry@s...>
> wrote:
> > Been working with LPC2138 with IAR just fine. Trying to move
> to smaller
> > LPC2131. When I download the same app it won't run to main.
> Anybody do
> > this yet?
> >
> > I think I'm looking for the equivalent LPC2138.i79 and
> iolpc2138.ddf
> > (device description file) for the 2131. Anything else?
> >
> > Thanks, Jeff
> >
> >
> > ________________________________
>
> > .
Reply by ●April 8, 20052005-04-08
I talked with IAR tech support and they said they will modify the 8 or
so files necessary to support the 2131. He says it's about a 2 hour
job. I should have them early next week. BTW: the 2130 files didn't
work. Jeff.
-----Original Message-----
From: charlesgrenz [mailto:charles.grenz@char...]
Sent: Friday, April 08, 2005 8:57 AM
To: lpc2000@lpc2...
Subject: [lpc2000] Re: IAR compiler and the LPC2131
Hi Jeff,
There isn't one. I assumed that it should read 213x since
there is
no actual part 2130. I have my rep. looking into it now to be on
the
safe side and I like to know how they specify the memory map for
the 3
different versions.
Charles
--- In lpc2000@lpc2..., "Lowry, Jeff" <jlowry@s...>
wrote:
> Thanks Charles. Mine too. I'm not aware of a philips
2130...just
> 2131/2/8. I wonder if the 2130 is really 2131...I'll give it
a try.
> Jeff.
>
> -----Original Message-----
> From: charlesgrenz [mailto:charles.grenz@s...]
> Sent: Friday, April 08, 2005 8:26 AM
> To: lpc2000@lpc2...
> Subject: [lpc2000] Re: IAR compiler and the LPC2131 >
> Hi Jeff,
> I just checked my version and only found a lpc2130.i79
and
> ddf. I am
> currently running 4.11.
>
> regards,
> Charles
>
> --- In lpc2000@lpc2..., "Lowry, Jeff"
<jlowry@s...>
> wrote:
> > Been working with LPC2138 with IAR just fine. Trying
to move
> to smaller
> > LPC2131. When I download the same app it won't run to
main.
> Anybody do
> > this yet?
> >
> > I think I'm looking for the equivalent LPC2138.i79 and
> iolpc2138.ddf
> > (device description file) for the 2131. Anything
else?
> >
> > Thanks, Jeff
> >
> >
> > ________________________________
>
> > .
________________________________
> .
so files necessary to support the 2131. He says it's about a 2 hour
job. I should have them early next week. BTW: the 2130 files didn't
work. Jeff.
-----Original Message-----
From: charlesgrenz [mailto:charles.grenz@char...]
Sent: Friday, April 08, 2005 8:57 AM
To: lpc2000@lpc2...
Subject: [lpc2000] Re: IAR compiler and the LPC2131
Hi Jeff,
There isn't one. I assumed that it should read 213x since
there is
no actual part 2130. I have my rep. looking into it now to be on
the
safe side and I like to know how they specify the memory map for
the 3
different versions.
Charles
--- In lpc2000@lpc2..., "Lowry, Jeff" <jlowry@s...>
wrote:
> Thanks Charles. Mine too. I'm not aware of a philips
2130...just
> 2131/2/8. I wonder if the 2130 is really 2131...I'll give it
a try.
> Jeff.
>
> -----Original Message-----
> From: charlesgrenz [mailto:charles.grenz@s...]
> Sent: Friday, April 08, 2005 8:26 AM
> To: lpc2000@lpc2...
> Subject: [lpc2000] Re: IAR compiler and the LPC2131 >
> Hi Jeff,
> I just checked my version and only found a lpc2130.i79
and
> ddf. I am
> currently running 4.11.
>
> regards,
> Charles
>
> --- In lpc2000@lpc2..., "Lowry, Jeff"
<jlowry@s...>
> wrote:
> > Been working with LPC2138 with IAR just fine. Trying
to move
> to smaller
> > LPC2131. When I download the same app it won't run to
main.
> Anybody do
> > this yet?
> >
> > I think I'm looking for the equivalent LPC2138.i79 and
> iolpc2138.ddf
> > (device description file) for the 2131. Anything
else?
> >
> > Thanks, Jeff
> >
> >
> > ________________________________
>
> > .
________________________________
> .
Reply by ●April 8, 20052005-04-08
Hi Jeff,
Just recieved some files with 2138 stuff and demo's as well from my
rep. He also mentioned that there will be an update soon to 4.20. Do
you currently have the 2138 files?
regards,
Charles
--- In lpc2000@lpc2..., "Lowry, Jeff" <jlowry@s...> wrote:
> I talked with IAR tech support and they said they will modify the 8 or
> so files necessary to support the 2131. He says it's about a 2 hour
> job. I should have them early next week. BTW: the 2130 files didn't
> work. Jeff.
>
> -----Original Message-----
> From: charlesgrenz [mailto:charles.grenz@s...]
> Sent: Friday, April 08, 2005 8:57 AM
> To: lpc2000@lpc2...
> Subject: [lpc2000] Re: IAR compiler and the LPC2131 >
> Hi Jeff,
> There isn't one. I assumed that it should read 213x since
> there is
> no actual part 2130. I have my rep. looking into it now to be on
> the
> safe side and I like to know how they specify the memory map for
> the 3
> different versions.
>
> Charles
>
> --- In lpc2000@lpc2..., "Lowry, Jeff" <jlowry@s...>
> wrote:
> > Thanks Charles. Mine too. I'm not aware of a philips
> 2130...just
> > 2131/2/8. I wonder if the 2130 is really 2131...I'll give it
> a try.
> > Jeff.
> >
> > -----Original Message-----
> > From: charlesgrenz [mailto:charles.grenz@s...]
> > Sent: Friday, April 08, 2005 8:26 AM
> > To: lpc2000@lpc2...
> > Subject: [lpc2000] Re: IAR compiler and the LPC2131
> >
> >
> >
> > Hi Jeff,
> > I just checked my version and only found a lpc2130.i79
> and
> > ddf. I am
> > currently running 4.11.
> >
> > regards,
> > Charles
> >
> > --- In lpc2000@lpc2..., "Lowry, Jeff"
> <jlowry@s...>
> > wrote:
> > > Been working with LPC2138 with IAR just fine. Trying
> to move
> > to smaller
> > > LPC2131. When I download the same app it won't run to
> main.
> > Anybody do
> > > this yet?
> > >
> > > I think I'm looking for the equivalent LPC2138.i79 and
> > iolpc2138.ddf
> > > (device description file) for the 2131. Anything
> else?
> > >
> > > Thanks, Jeff
> > >
> > >
> > >
> >
> >
> >
> >
> >
> > ________________________________
> >
> > > .
> >
> >
> >
> >
> > ________________________________
>
> > .
Reply by ●April 8, 20052005-04-08
Hi Charles,
Yes. I had to get some updated files from them for flash downloading,
etc. I have a project that works with the Keil 2130 (LPC2131) eval
board and the IAR Jlink USB debugger.
Jeff.
-----Original Message-----
From: charlesgrenz [mailto:charles.grenz@char...]
Sent: Friday, April 08, 2005 10:07 AM
To: lpc2000@lpc2...
Subject: [lpc2000] Re: IAR compiler and the LPC2131
Hi Jeff,
Just recieved some files with 2138 stuff and demo's as well
from my
rep. He also mentioned that there will be an update soon to
4.20. Do
you currently have the 2138 files?
regards,
Charles
--- In lpc2000@lpc2..., "Lowry, Jeff" <jlowry@s...>
wrote:
> I talked with IAR tech support and they said they will modify
the 8 or
> so files necessary to support the 2131. He says it's about a
2 hour
> job. I should have them early next week. BTW: the 2130 files
didn't
> work. Jeff.
>
> -----Original Message-----
> From: charlesgrenz [mailto:charles.grenz@s...]
> Sent: Friday, April 08, 2005 8:57 AM
> To: lpc2000@lpc2...
> Subject: [lpc2000] Re: IAR compiler and the LPC2131 >
> Hi Jeff,
> There isn't one. I assumed that it should read 213x
since
> there is
> no actual part 2130. I have my rep. looking into it now
to be on
> the
> safe side and I like to know how they specify the memory
map for
> the 3
> different versions.
>
> Charles
>
> --- In lpc2000@lpc2..., "Lowry, Jeff"
<jlowry@s...>
> wrote:
> > Thanks Charles. Mine too. I'm not aware of a philips
> 2130...just
> > 2131/2/8. I wonder if the 2130 is really 2131...I'll
give it
> a try.
> > Jeff.
> >
> > -----Original Message-----
> > From: charlesgrenz [mailto:charles.grenz@s...]
> > Sent: Friday, April 08, 2005 8:26 AM
> > To: lpc2000@lpc2...
> > Subject: [lpc2000] Re: IAR compiler and the
LPC2131
> >
> >
> >
> > Hi Jeff,
> > I just checked my version and only found a
lpc2130.i79
> and
> > ddf. I am
> > currently running 4.11.
> >
> > regards,
> > Charles
> >
> > --- In lpc2000@lpc2..., "Lowry, Jeff"
> <jlowry@s...>
> > wrote:
> > > Been working with LPC2138 with IAR just fine.
Trying
> to move
> > to smaller
> > > LPC2131. When I download the same app it
won't run to
> main.
> > Anybody do
> > > this yet?
> > >
> > > I think I'm looking for the equivalent
LPC2138.i79 and
> > iolpc2138.ddf
> > > (device description file) for the 2131.
Anything
> else?
> > >
> > > Thanks, Jeff
> > >
> > >
> > > [Non-text portions of this message have been
removed]
> >
> >
> >
> >
> >
> > ________________________________
> >
> > > .
> >
> >
> >
> >
> > ________________________________
>
> > .
________________________________
> .
Yes. I had to get some updated files from them for flash downloading,
etc. I have a project that works with the Keil 2130 (LPC2131) eval
board and the IAR Jlink USB debugger.
Jeff.
-----Original Message-----
From: charlesgrenz [mailto:charles.grenz@char...]
Sent: Friday, April 08, 2005 10:07 AM
To: lpc2000@lpc2...
Subject: [lpc2000] Re: IAR compiler and the LPC2131
Hi Jeff,
Just recieved some files with 2138 stuff and demo's as well
from my
rep. He also mentioned that there will be an update soon to
4.20. Do
you currently have the 2138 files?
regards,
Charles
--- In lpc2000@lpc2..., "Lowry, Jeff" <jlowry@s...>
wrote:
> I talked with IAR tech support and they said they will modify
the 8 or
> so files necessary to support the 2131. He says it's about a
2 hour
> job. I should have them early next week. BTW: the 2130 files
didn't
> work. Jeff.
>
> -----Original Message-----
> From: charlesgrenz [mailto:charles.grenz@s...]
> Sent: Friday, April 08, 2005 8:57 AM
> To: lpc2000@lpc2...
> Subject: [lpc2000] Re: IAR compiler and the LPC2131 >
> Hi Jeff,
> There isn't one. I assumed that it should read 213x
since
> there is
> no actual part 2130. I have my rep. looking into it now
to be on
> the
> safe side and I like to know how they specify the memory
map for
> the 3
> different versions.
>
> Charles
>
> --- In lpc2000@lpc2..., "Lowry, Jeff"
<jlowry@s...>
> wrote:
> > Thanks Charles. Mine too. I'm not aware of a philips
> 2130...just
> > 2131/2/8. I wonder if the 2130 is really 2131...I'll
give it
> a try.
> > Jeff.
> >
> > -----Original Message-----
> > From: charlesgrenz [mailto:charles.grenz@s...]
> > Sent: Friday, April 08, 2005 8:26 AM
> > To: lpc2000@lpc2...
> > Subject: [lpc2000] Re: IAR compiler and the
LPC2131
> >
> >
> >
> > Hi Jeff,
> > I just checked my version and only found a
lpc2130.i79
> and
> > ddf. I am
> > currently running 4.11.
> >
> > regards,
> > Charles
> >
> > --- In lpc2000@lpc2..., "Lowry, Jeff"
> <jlowry@s...>
> > wrote:
> > > Been working with LPC2138 with IAR just fine.
Trying
> to move
> > to smaller
> > > LPC2131. When I download the same app it
won't run to
> main.
> > Anybody do
> > > this yet?
> > >
> > > I think I'm looking for the equivalent
LPC2138.i79 and
> > iolpc2138.ddf
> > > (device description file) for the 2131.
Anything
> else?
> > >
> > > Thanks, Jeff
> > >
> > >
> > > [Non-text portions of this message have been
removed]
> >
> >
> >
> >
> >
> > ________________________________
> >
> > > .
> >
> >
> >
> >
> > ________________________________
>
> > .
________________________________
> .
Reply by ●April 8, 20052005-04-08
Hi Jeff,
I'm still waiting for a response about the 4.20 update. So far this
is what I found on the website.
http://www.iar.com/FilesPublic/SUPPORT/002106/LPC_readme.htm
regards,
Chahresl --- In lpc2000@lpc2..., "Lowry, Jeff" <jlowry@s...> wrote:
> Hi Charles,
> Yes. I had to get some updated files from them for flash downloading,
> etc. I have a project that works with the Keil 2130 (LPC2131) eval
> board and the IAR Jlink USB debugger.
> Jeff.
>
> -----Original Message-----
> From: charlesgrenz [mailto:charles.grenz@s...]
> Sent: Friday, April 08, 2005 10:07 AM
> To: lpc2000@lpc2...
> Subject: [lpc2000] Re: IAR compiler and the LPC2131 >
> Hi Jeff,
>
> Just recieved some files with 2138 stuff and demo's as well
> from my
> rep. He also mentioned that there will be an update soon to
> 4.20. Do
> you currently have the 2138 files?
>
> regards,
> Charles
>
> --- In lpc2000@lpc2..., "Lowry, Jeff" <jlowry@s...>
> wrote:
> > I talked with IAR tech support and they said they will modify
> the 8 or
> > so files necessary to support the 2131. He says it's about a
> 2 hour
> > job. I should have them early next week. BTW: the 2130 files
> didn't
> > work. Jeff.
> >
> > -----Original Message-----
> > From: charlesgrenz [mailto:charles.grenz@s...]
> > Sent: Friday, April 08, 2005 8:57 AM
> > To: lpc2000@lpc2...
> > Subject: [lpc2000] Re: IAR compiler and the LPC2131
> >
> >
> >
> > Hi Jeff,
> > There isn't one. I assumed that it should read 213x
> since
> > there is
> > no actual part 2130. I have my rep. looking into it now
> to be on
> > the
> > safe side and I like to know how they specify the memory
> map for
> > the 3
> > different versions.
> >
> > Charles
> >
> > --- In lpc2000@lpc2..., "Lowry, Jeff"
> <jlowry@s...>
> > wrote:
> > > Thanks Charles. Mine too. I'm not aware of a philips
> > 2130...just
> > > 2131/2/8. I wonder if the 2130 is really 2131...I'll
> give it
> > a try.
> > > Jeff.
> > >
> > > -----Original Message-----
> > > From: charlesgrenz [mailto:charles.grenz@s...]
> > > Sent: Friday, April 08, 2005 8:26 AM
> > > To: lpc2000@lpc2...
> > > Subject: [lpc2000] Re: IAR compiler and the
> LPC2131
> > >
> > >
> > >
> > > Hi Jeff,
> > > I just checked my version and only found a
> lpc2130.i79
> > and
> > > ddf. I am
> > > currently running 4.11.
> > >
> > > regards,
> > > Charles
> > >
> > > --- In lpc2000@lpc2..., "Lowry, Jeff"
> > <jlowry@s...>
> > > wrote:
> > > > Been working with LPC2138 with IAR just fine.
> Trying
> > to move
> > > to smaller
> > > > LPC2131. When I download the same app it
> won't run to
> > main.
> > > Anybody do
> > > > this yet?
> > > >
> > > > I think I'm looking for the equivalent
> LPC2138.i79 and
> > > iolpc2138.ddf
> > > > (device description file) for the 2131.
> Anything
> > else?
> > > >
> > > > Thanks, Jeff
> > > >
> > > >
> > > > [Non-text portions of this message have been
> removed]
> > >
> > >
> > >
> > >
> > >
> > > ________________________________
> > >
> > > > .
> > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
> >
> > ________________________________
> >
> > > .
> >
> >
> >
> >
> > ________________________________
>
> > .
