Forums

ucosii and lpc2138

Started by fasis August 16, 2005
Hello All,

I am new in RTOS stuff, after searched and read messages in this
Group, I picked ucosii instead of others for my LPC2138's OS. I plan
to order The book comes with sources ucosii, is that enough for
lpc2138? Or which ucosii version does support lpc2138?

Thanks

Afrizal



An Engineer's Guide to the LPC2100 Series

I integrated ucosii on a 2214 platform and it worked well. You will have to
make a few modifications to the board support section of the source for your
particular processor but their web site offers several port samples for
micros similar to the 2138.

Good luck.
-----Original Message-----
From: lpc2000@lpc2... [mailto:lpc2000@lpc2...]On Behalf Of
fasis
Sent: Tuesday, August 16, 2005 7:06 AM
To: lpc2000@lpc2...
Subject: [lpc2000] ucosii and lpc2138 Hello All,

I am new in RTOS stuff, after searched and read messages in this
Group, I picked ucosii instead of others for my LPC2138's OS. I plan
to order The book comes with sources ucosii, is that enough for
lpc2138? Or which ucosii version does support lpc2138?

Thanks

Afrizal SPONSORED LINKS Microcontrollers Microprocessor Intel microprocessors
Pic microcontrollers 8085 microprocessor ----
--
YAHOO! GROUPS LINKS

a.. ----
--




> Hello All,
>
> I am new in RTOS stuff, after searched and read messages in this
> Group, I picked ucosii instead of others for my LPC2138's OS. I plan
> to order The book comes with sources ucosii, is that enough for
> lpc2138? Or which ucosii version does support lpc2138?
>
> Thanks
>

Hi Afrizal

Yes, buy the second edition of the book, and then here is a port
of the code by Jean Labrosse (AN1011) for GCC, along with a
serial port driver for the MCB2130.

http://www.ovro.caltech.edu/~dwh/ucos/index.html

Dave


I have integrated uCOS-II on a 2294 platform and it works great. uCOS is
an easy to use Real Time Kernel and is very solid. J.J. Labrosse himself
has ported uCOS for the ARM-Platform. Please read the following
Application Notes on the Micrium Homepage (www.micrium.com):

AN1014
AN1138

This describe the port for LPC2138. You find it as follow: Klick to
Products, then uC/OS-II, then DOWNLOAD. You will find under PHILIPS the
Link to the application notes.

Good luck
Martin
________________________________

Von: fasis [mailto:fasis@fasi...]
Gesendet: Dienstag, 16. August 2005 13:06
An: lpc2000@lpc2...
Betreff: [lpc2000] ucosii and lpc2138 Hello All,

I am new in RTOS stuff, after searched and read messages in this
Group, I picked ucosii instead of others for my LPC2138's OS. I plan
to order The book comes with sources ucosii, is that enough for
lpc2138? Or which ucosii version does support lpc2138?

Thanks

Afrizal
SPONSORED LINKS
Microcontrollers
<http://groups.yahoo.com/gads?t=ms&k=Microcontrollers&w1=Microcontroller
s&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&w5=
8085+microprocessor&c=5&s0&.sig=OPqm0ilH6VyGn-geZ0nNwA>
Microprocessor
<http://groups.yahoo.com/gads?t=ms&k=Microprocessor&w1=Microcontrollers&
w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&w5
85+microprocessor&c=5&s0&.sig93hF7rArBsrPQJltQ_w> Intel
microprocessors
<http://groups.yahoo.com/gads?t=ms&k=Intel+microprocessors&w1=Microcontr
ollers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontroller
s&w585+microprocessor&c=5&s0&.sigrTtKaQUw-Vd0BgTdDmw>
Pic microcontrollers
<http://groups.yahoo.com/gads?t=ms&k=Pic+microcontrollers&w1=Microcontro
llers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers
&w585+microprocessor&c=5&s0&.sig=iYT6za1gT3-VT1hwIylDpw>
8085 microprocessor
<http://groups.yahoo.com/gads?t=ms&k85+microprocessor&w1=Microcontrol
lers&w2=Microprocessor&w3=Intel+microprocessors&w4=Pic+microcontrollers&
w585+microprocessor&c=5&s0&.sig=PhYMBsCkQptYbazQFyNujQ>

________________________________

> .


________________________________