Pascal,

Thanks a lot for your valuable inputs , I will go ahead with
mspgcc+eclipse, If you used this combination can you help me in this regard
. I am using MSP430F2274
Thanks in advance,
Rajesh V

On Wed, Sep 2, 2009 at 3:46 AM, p_murayama wrote:

> Pascal
>
> Hello!
>
> There are only few non-windows development systems.
> Crossworks has a MacOS-X version, and it's the only commercial
> non-windows IDE I know.
>
> You may also consider mspgcc + Eclipse. The main advantage is
> that it is free.
>
> And last solution, you can run any windows IDE on Linux or Mac
> by using VMWare. I am using IAR on Mac with VMWare, and I also
> successfully tried CCE 3.
>
> Pascal
> --- In m... , "rs_962000"
> wrote:
> >
> > Hi all,
> >
> > Did any one tried IAR on linux. if yes please let me know the procedure
> for the same.
> >
> > Thanks in advance,
> > Rajesh.v
> >
>

--
if you don't know where you are going any road will get you there
Best regards
Rajesh V


Start a New Thread

You can also try VirtualBox (http://www.virtualbox.org/) which is a free equivalent to VMWare.
But I don't know if those "virtual machine" solutions can handle neither the IAR USB dongle nor a debugger like MSP-FET430UIF.
--- In m..., "p_murayama" wrote:
>
> Hello!
>
> There are only few non-windows development systems.
> Crossworks has a MacOS-X version, and it's the only commercial
> non-windows IDE I know.
>
> You may also consider mspgcc + Eclipse. The main advantage is
> that it is free.
>
> And last solution, you can run any windows IDE on Linux or Mac
> by using VMWare. I am using IAR on Mac with VMWare, and I also
> successfully tried CCE 3.
>
> Pascal
>
> --- In m..., "rs_962000" wrote:
> >
> > Hi all,
> >
> > Did any one tried IAR on linux. if yes please let me know the procedure for the same.
> >
> > Thanks in advance,
> > Rajesh.v
>
Start a New Thread

--- On Wed, 9/2/09, Rajesh v wrote:

> From: Rajesh v
> Subject: Re: [msp430] Re: IAR on linux
> To: m...
> Date: Wednesday, September 2, 2009, 3:53 AM
> Pascal,
>
> Thanks a lot for your valuable inputs , I will go
> ahead with
> mspgcc+eclipse, If you used this combination can you help
> me in this regard
> . I am using MSP430F2274
>

MSPGCC + Code::Blocks is also a good alternative.

Regards
Juan

>
> Thanks in advance,
> Rajesh V
>
> On Wed, Sep 2, 2009 at 3:46 AM, p_murayama
> wrote:
>

Start a New Thread

Hi,

the USB stuff works fine with VMWare (Windows as guest system)
I use the msp430-gdbproxy and the Olimex MSP430-JTAG-TINY without problems.
I have no experience with Virtual Box. But I'm sure "Virtual PC" DOESN'T
work .

There is some instruction to install the GCC + Eclipse environment under
Linux if you
follow the link (http://www.develissimo.net/index.html there is an
english and a german version)
but I have never tried it and it seams to be build on older versions.

Regards,

Dirk
frank_ymail schrieb:
>
>
> You can also try VirtualBox (http://www.virtualbox.org/
> ) which is a free equivalent to VMWare.
> But I don't know if those "virtual machine" solutions can handle
> neither the IAR USB dongle nor a debugger like MSP-FET430UIF.
>
> --- In m... ,
> "p_murayama" wrote:
> >
> > Hello!
> >
> > There are only few non-windows development systems.
> > Crossworks has a MacOS-X version, and it's the only commercial
> > non-windows IDE I know.
> >
> > You may also consider mspgcc + Eclipse. The main advantage is
> > that it is free.
> >
> > And last solution, you can run any windows IDE on Linux or Mac
> > by using VMWare. I am using IAR on Mac with VMWare, and I also
> > successfully tried CCE 3.
> >
> > Pascal
> >
> > --- In m... ,
> "rs_962000" wrote:
> > >
> > > Hi all,
> > >
> > > Did any one tried IAR on linux. if yes please let me know the
> procedure for the same.
> > >
> > > Thanks in advance,
> > > Rajesh.v
> > >
> >

Start a New Thread

Hello!

No, I don't use mspgcc+eclipse, sorry.
I use CCE and IAR on a mac, via VMWare / WindowsXP.

Pascal

--- In m..., Rajesh v wrote:
>
> Pascal,
>
> Thanks a lot for your valuable inputs , I will go ahead with
> mspgcc+eclipse, If you used this combination can you help me in this regard
> . I am using MSP430F2274
> Thanks in advance,
> Rajesh V
>
> On Wed, Sep 2, 2009 at 3:46 AM, p_murayama wrote:
>
> > Pascal
> >
> > Hello!
> >
> > There are only few non-windows development systems.
> > Crossworks has a MacOS-X version, and it's the only commercial
> > non-windows IDE I know.
> >
> > You may also consider mspgcc + Eclipse. The main advantage is
> > that it is free.
> >
> > And last solution, you can run any windows IDE on Linux or Mac
> > by using VMWare. I am using IAR on Mac with VMWare, and I also
> > successfully tried CCE 3.
> >
> > Pascal
> >
> >
> > --- In m... , "rs_962000"
> > wrote:
> > >
> > > Hi all,
> > >
> > > Did any one tried IAR on linux. if yes please let me know the procedure
> > for the same.
> > >
> > > Thanks in advance,
> > > Rajesh.v
> > >
> >
> >
> > --
> if you don't know where you are going any road will get you there
> Best regards
> Rajesh V
>
>
Start a New Thread