Hi to all,
I have two MSP430F5419, after a few downloading code into the flash,
I have a problem to access to upper flash memory bank.(bank2)
After downloading the code in to the flash with USB-IF jtag, in verifying I have
a fatal error.
The problem is that I cant write correctly in Bank2.The target and file contents
are different.
Any body have any idea for this problem or have any soluation?
please help me.
Upper flash memory bank (bank 2) access problem
Started by ●June 21, 2010
Reply by ●June 22, 20102010-06-22
Hamzeh Nasajpour :
> Hi to all,
> I have two MSP430F5419, after a few downloading code into the flash,
> I have a problem to access to upper flash memory bank.(bank2)
> After downloading the code in to the flash with USB-IF jtag, in
> verifying I have a fatal error. The problem is that I cant write
> correctly in Bank2.The target and file contents are different.
>
> Any body have any idea for this problem or have any soluation?
>
> please help me.
Try erasing the bank 2 manually before flashing. Having similar problems with
Crossworks studio, but in the lower bank.
M.
> Hi to all,
> I have two MSP430F5419, after a few downloading code into the flash,
> I have a problem to access to upper flash memory bank.(bank2)
> After downloading the code in to the flash with USB-IF jtag, in
> verifying I have a fatal error. The problem is that I cant write
> correctly in Bank2.The target and file contents are different.
>
> Any body have any idea for this problem or have any soluation?
>
> please help me.
Try erasing the bank 2 manually before flashing. Having similar problems with
Crossworks studio, but in the lower bank.
M.